Product Details
0.012 - 0.8mm Self Bonding Wire Self Adhesive Enamelled Copper
Winding Wire
Heat Bonding All bondcoats can be heat bonded, either by
oven-heating or by directing hot air on to the wire during winding.
In either case, the principle is to heat the winding slightly above
the bondcoat's reflow temperature and then cool it below its rated
bond strength temperature. Oven bonding is accomplished by heating
the coil for a period of time sufficient to obtain uniform heating
throughout the winding, followed by a cooling cycle. Heating time
is generally 10 to 30 minutes, depending on the size of the
winding.
Name | 0.012 - 0.8mm Self Bonding Wire Self Adhesive Enamelled Copper
Winding Wire |
Key word | Enameled copper wire |
Insulation | Polyurethane |
Thermal rating | 155degree |
Diameter of the enameled copper wire | 0.036mm |
Key word | 0.012 - 0.8mm Self Bonding Wire Self Adhesive Enamelled Copper
Winding Wire |
Characteristics | Technical requests | |
Sample 1 | Sample 2 |
Surface | Good | OK | OK |
Bare Wire Diameter | 0.036±0.001 | 0.036 | 0.036 |
Coating Thickness | ≥ 0.009 mm | 0.009 | 0.009 |
Overall Diameter | ≤ 0.051 mm | 0.049 | 0.048 |
Conductor Resistance | ≤ 17.920 Ω/m | 17.03 | 16.98 |
Elongation | ≥ 11 % | 21 | 22 |
Breakdown Voltage | ≥ 650 V | 3237 | 3172 |
Pinhole Test | ≤ 3 孔/5m | 0 | 0 |
Test Items | Technical Requests | Results |
Adhesive | Coating layer is good | OK |
Cut-through | 200℃ 2mins no breakdown | OK |
Heat Shock | 175±5℃/30min no crack | OK |
Solder Ability | 390± 5℃ 2 Sec Smooth | OK |
Ruiyuan Company was awarded the "Quality A Supplier" by a German
Brand
Company Profile
RUIYUAN was established in 2002, located in Tianjin City,the second
largest port city in China.We have been focusing on different kinds
of high quality wires: enameled round copper wire, rectangular
enameled copper triple insulated wire, silk covered Litz wire,
bonding wire and special enameled wire for 21 years.Ruiyuan is one
of the pioneers in producing micro thin enameled wires below 0.03mm
in China. Our R & D team has 20 years of market experience. In
2019, our finest diameter is 0.011mm, and mass production has been
achieved. All of our products are UL, RoHS certified, in line with
industry standards IEC60317, JIS C 3202, NEMA, NW82.