20ton Cabin Control Travelling Overhead Crane

20ton Cabin Control Travelling Overhead Crane

Brief introduction of 20ton cabin control travelling overhead crane:

1)It is composed with girder frame, crane travel device, and the trolley with lifting and moving device. There is pave the rail for the trolley moves on the main girder

2)Assembled the moving table on the outside of the two main girder,one side is prepare for assemble and maintenance the crane move device,another side is prepare for assemble of the trolley conductor device.

3)There are full field of view cabin suspend under the main girder, there are joint control desk or single control box packed within the cabin, assemble the sidelong ladder between the cabin

and moving table.

4)The main girder joint with the two side end carriage which with the joint point in the middle.

Applications of 20ton cabin control travelling overhead crane

1)This model crane mainly consists of bridge, end girder travelling mechanism, Winch trolley and

electical appliances.

2)They are applicable to the transfer, assembly, check and repair as well as load and unload at

mechanic processing workshop,subsidiary workshop of metallurgical mills, warehouse, in light

textiles.

3)Advanced equipment and manufacturing shop is the guarantee.We are committed to produce the best quality products.

Safety features of 20ton cabin control travelling overhead crane:

1)Crane travelling limit switch,

2)Weight overload protection device,

3)Lifting height limit device,

4)Voltage lower protection function,

5)Phase sequence protection function,

6)Emergency stop function,

7)Rail cover for outside hoist,driving units,electrical cubicle

8)Warning Indicator-detector for anti-collusion,

Safety features of 20ton cabin control travelling overhead crane:

Factory view of 20ton cabin control travelling overhead crane:

Order notice of 20ton cabin control travelling overhead crane:

Pls kindly inform us the following details while you send the inquiry:

1.What is the lifting capacity?

2.What is the span length ?(Span=distance between center of two rails)

3.What is the lifting height?(Lifting height=Distance from hook to ground)

4.What is the lifting speed?(Single speed or double speed)

5.What control mode do you need?(Pendant control or remote control or cabin)

6.What is the power supply in your country?(Our standard power supply is 380V,3Ph,50Hz)

7.Is there any other special requirements?(Like need us to supply rails?how long? etc)

Service we can provide

1.Payment terms is flexible,

2.Design the crane according to your technical request,

3.Delivery on time,

4.Our engineer can arrive to the installation site to help fixing the crane for you,

5.Diversity products,

6.Warranty:12 months

RFQ of 20ton cabin control travelling overhead crane:

1.Does your products customized?

Thanks for your question.Yes,As the working conditions are different,all of our products can be customized.

2.What information should I provide when inquiring?

Thanks for your question. The more information you provide,the more accurate solution we can provide for you. If you can inform us the technical parameters such as the lifting capacity,span length,lifting height,power source or other data,we will be more appreciate.

3.How many kinds of operation method can I select?

Thanks for your question.The standard operation method we provide is pendant controller with press button. Meanwhile,we also provide the remote control with oush buttons and the cabin control with joystick. You can choose any of them,just tell us.

4.What is the max lifting capacity of the crane?

Thanks for your question. The max lifting capacity of our standard crane are up to 450ton. If this can not satisfy your working requirement,please contact us for special customized.

5.Can you provide lift tools?

Thanks for your question. Yes,we can provide any kinds of lift tools such as lift sling belt,lift clamp,grab,electric hoist,magnet and other specials as your requirement.

Henan Kuangshan Crane Co., Ltd is China leading cranes and hoists supplier, focused on the production and sale of crane and accessories including dingle and double beam bridge crane, gantry crane, electric hoist,

In 2013, our total sales volume achieves 2.48billion RMB, exporting 120million to world market.

We have more than 4200 employees, cover 680, 000 square meters and hold RMB380 million capital and over 380 branches around the world. The 1200-plus sets of equipment enable us to finish independently over 20 technological flows, including lathing, milling, planning and grinding. More than 180 medium and senior technical staff members are responsible for the design and production guidance of whole products.

We have passed ISO9001: 2000 international quality control standard, ISO14001: 1996 environment and ISO9001: 2001 health and safety standard. We have a perfect quality-control system, a strict management system, strong production capabilities and advanced testing measures to ensure the high production and high quality.

Quality makes the brand, honesty weaves bright future, we hope Kuangyuan make contribution to economy industry's taking off. Hold hands of Kuangyuan,being friends for ever. We sincerely seek for common progress and resplendence cooperating with all friends, friends and establish brilliance.