ATL-960 Addressable Manual Call Point

Product overview
The ATL-960 addressable manual call point (manual call point for short) is mainly designed to be used with an intelligent two-bus control panel. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control panel which will, after receiving the alarm signal, display the coded address and the equipment status of the manual call point. When the manual call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The manual call point supports electronic coding and has a built-in fire telephone jack and a PHONE indicator, making its engineering application convenient.

Product features
1 It can realize complete electronic coding and in situ rewriting with help of a coder.
2 Designed with an upper cover and a lower cover, it can be installed, debugged and maintained conveniently.
3 It is designed with a two-wire fire telephone jack and is therefore more applicable to engineering application.
4 Designed with passive output contacts, it can control other external equipment directly through an intermediate relay.
5 The pressing sheet on the manual call point will not get crushed after it is pressed, but can be reset by a special tool, so it can be used repeatedly.

Technical parameters
1. Executive standard: GB19880-2005
2. Operating voltage: 24V (pulse modulation)
3. Operating current: ＜300uA (in the monitoring status); ＜2mA (in the action status)
4. Output contact: Normally open contact; capacity: 0.1A/30VDC
5. Weight: About 120g
6. Wiring method: nonpolar two-bus system (L1, L2)
7. Operating environment: Indoor, temperature: －10℃～＋50℃; relative humidity: ≤95% (40℃±2℃, without condensation)
8. Coding method: It can realize online coding with the help of a coder and without the necessity of disassembling the bus (however, the equipment must be powered off). Address codes 1 to 324 are available for selection.
9. Telephone jack: Two-wire fire telephone jack (equipped with a standard Ф6.3 single-track audio connector).
10. Starting part: A plastic pressing sheet that may be used repeatedly. It can be manually reset with a special tool after being pressed.
11. Starting mode: Press the pressing sheet manually.
12. Indicator: The red ALARM indicator will blink in the inspection status or remain lit in the alarm status; the PHONE indicator will blink when a fire telephone loop is connected, otherwise it will be out.
13. Matched host machine: fire alarm control panel (such as ATL-MN300)

Appearance and dimensions

What can we do for you?
Angel Technologies Hongkong Ltd.( hereinafter referred to as ATL) dedicates to providing cost-effective quality fire alarm solutions and perfect service to overseas customers. Products include: Addressable fire alarm systems, Conventional fire alarm systems, domestic fire detect alarms and gas extinguishing system. They are widely used in families and over 100 kinds of public places, such as the hospital, schools, hotels, office buildings, dormitories, factories, restaurants, banks, warehouse, buses, railways, libraries, filling stations, etc.
You are welcome to be our overseas agents, and we support OEM&ODM.

Are we factory?
All products are produced in Shenzhen Convoys Fire Technology Limited（hereinafter referred to as CFT）, by which ATL is especially founded to support the oversea customers, CFT is in charge of production and the domestic trade. CFT & ATL belong to the same founder, so ATL provide the same price and service as the factory CFT.
We provide one-stop service for you, from R&D to after-sale service.

About CFT
CFT is located in Shenzhen China, focusing on fire alarm solutions since 2005, and already serviced for about 100 overseas customers. We R&D, produce, sell products and provide after-sale service ourselves. Our product has reached the international advanced level by the non-stop effort those years, there´s almost no miss -alarm and false-alarm, the rate of correct and timely alarm is 99.9%, and we are continuously developing new products to meet nowadays’ new needs, so that you can make your safety status under control, no matter anywhere, no matter when.

Any certification?
We have already got the certificates of ISO 9001:2008, CE, and ROHS. If any other requirements, we´d like meet you.

How to cooperate?
Apply for sample --- Sample approval --- Trial order --- Substantial order --- Orders reach some quantity -- Apply for agency --- Exclusive agency

Our vision
We hope all of us on the earth could be away from fire risk because of the protection of our secure products. We’d like to make great contributions to the safety of human life and property, let the world to be more beautiful and happier.