

Add to Cart
The Programmable Composite Salt Spray Test Chamber is designed to simulate and increase the environmental effects on metal materials exposed to outdoor atmosphere with salt contamination and accelerated corrosion. The equipment includes test methods for cyclic exposure of samples to salt spray, dry, humid and hot environments. The test of this equipment is a comparative test, and the test results cannot predict the long-term corrosion resistance of the same metal materials used in this environmental condition. However, this method can still provide valuable information about the properties of materials exposed to salt contamination under conditions similar to those tested. Compared with the traditional accelerated corrosion test, such as neutral salt spray test (NSS), acetic acid salt spray test (AASS), copper accelerated acetic acid salt spray test (CASS), the biggest advantage of this device test is that it can better reproduce the corrosion occurring in outdoor salt pollution environment.
At the same time, it is suitable for accelerated corrosion tests, such as metals and their alloys, metal coatings (anodic and negative polarity), conversion coatings, anodic oxidation coatings, organic coatings on metal materials, etc.
Parameter | Details | |
Model number | IE4060L | |
Temperature range | 0℃ ~ +90℃ | |
Temperature deviation | ±1℃ | |
Temperature fluctuation | ±0.5℃ | |
Temperature uniformity | ≦2.0℃ | |
Humidity range | 20~100%R.H | |
Humidity deviation | ±2%R.H | |
Humidity fluctuation | ±2%R.H | |
Humidity uniformity | ±3%R.H | |
Temperature and humidity range | ||
Rate of heating and cooling | RT→+95℃≤50 min. RT→+0℃≤30 min. Salt spray (35℃)→ drying (60℃.20~30%RH)≤30 min. Drying (60℃,20~30%RH)→ wetting (50℃,95%+/-5%RH)≤15 min. Wetting (50℃,95%+/-5%RH)→ salt spray (35℃)≤30 min(immediately spray after switching). | |
Test effective inner volume | 150L | |
Interior dimension:WxHxD(mm) | 600*500*500 | |
Carton size:WxHxD(mm) | 1780*950*1300 | |
Box structure | Test chamber: imported CPVC polyethylene plate, thickness 8mm, temperature resistance of about 120 degrees. Outdoor test box: imported CPVC polyethylene plate, thickness 8mm, temperature resistance of about 120 degrees. Laboratory seal cover: imported CPVC polyethylene plate, thickness 8mm, one-button automatic opening cover, with transparent observation window, combined with fog removal device, Convenient for clear observation of the test during the test, temperature resistance of about 120 degrees. | |
Water refill method | Automatic/manual dual water supply mode, automatic water inlet with a set of water purifier | |
Sample Stand | The inner wall of the CPVC polyvinyl triangle box is placed on the index frame, and the Angle of the test product can be adjusted arbitrarily, and the number of test pieces is completely consistent in the four sides falling fog and receiving fog. CPVC plate punching sample placement platform is set at the bottom of the test chamber. The uniform opening on the surface of the platform will quickly discharge the spray liquid, and large samples can be placed on the table for testing. | |
Refrigeration compressor | France Taikang fully closed compressor | |
Coolants | Non-fluorine environmental refrigerant R404A complies with environmental regulations and is safe and non-toxic | |
Condenser system | Air-cooled | |
Safety protection device | Refrigeration System | Compressor overheat protection Compressor overcurrent protection Compressor overpressure, low pressure protection Condensate fan overheat protection |
Test Chamber | Adjustable overtemperature protection alarm Air conditioning channel limit overtemperature protection Fan, motor overheat relay protection | |
Heating System | Heating tube dry burning protection Abnormal water supply alarm Abnormal drainage alarm | |
Other | Earth leakage protection Overload and short circuit protection The power supply lacks reverse phase protection function | |
Weight(Kg) | About 300 | |
Power supply | AC380V;50Hz;7KW |
Infinity company offer comprehensive technical support and service for all our Programmable Composite Salt Spray Test Chamber. Our team of experts is available to assist with any technical queries you may have, and we can provide on-site installation and maintenance services for customers with more complex needs.
Our technical support covers both hardware and software components of the Programmable Composite Salt Spray Test Chamber. We can assist with installation and configuration, troubleshooting and repair, and calibration and validation. Our team also provides support for software applications and operating systems, helping customers to get the most out of their test chambers.
We are committed to providing excellent service to all our customers. Our team is available 7 days a week to answer any questions you may have and provide assistance with any technical issues. We also offer a range of customer training courses to ensure that customers are fully equipped to use their Programmable Composite Salt Spray Test Chamber optimally.
Packaging and Shipping for Programmable Composite Salt Spray Test Chamber: