Product Details
Semi Continuous Push Pull Pickling Line For Removing Ferric Oxide
A layer of brittle and hard ferric oxide will form on the surface
of the steel strip during hot rolling ,and the ferric oxide layer
will affect the surface quality o the strip during cold rolling.
Pickling process is applied for removing the ferric oxide. We are
professional in this technology and we can provide the following
kinds of pickling lines, Push-pull pickling line(semi-continuous
pickling line) and continuous pickling line.
Push-pull pickling line.
it is a semi-continuous production line. It is characteristic with
lower consumption, easy operation and fewer malfunctions. moreover,
it can pickling many kinds of incoming materials. the line can
produce 100,000-600,000 tons of trip annually.
Process flow:
payoff reel--nine-roll leveller--end shear--riveter--entry
looper--pre-rinsing section pickling tank--rinsing tank--hot air
drier--exit looper--deflector--disc shear(with scrap
coiler)--bridle roll--shear--oiler--coiler
Process parameter
Acid | Annual capacity | strip thickness | strip width | coil weight | line speed |
HCL | 400,000T/year | 1.2-1.8-4.5mm | 500-1300 | Max 25T | Max 120m/min |
Continuous pickling line
It is a production line that the steel strip is pulled continuously
through the acid tank and rinsing tank. The line is characteristic
with high efficiency and output, and low electric consumption. The
annual capacity of the line is 600,000-1,000,000 tons.
Acid | Annual capacity | strip thickness | strip width | coil weight | line speed |
HCL | 800,000T | 1.2-4.5mm | 500-1530mm | Max 30T | Max 300m/min |
Company Profile
Our company is the limited type converted from a state-run type.It
has specialized in manufacturing metallurgical equipments for over
30 years.It has three production bases,covering 100,000M2
construction area.Equipped with large machining center and special
processing machines for metallurgical machinery,it can produce
various machines.It has been the largest rolling mill manufacturer
and taken the pioneering place in Jiangsu rolling mill
manufacturing field.Our products are popular around China and some
are exported.Therefore it boasts higher reputation in metallurgical
Industry.
Wuxi Wuye Heavy Industry Machinery Co.,LTD.
Wuxi NO.5 Metallurgical Machinery Co.,LTD.
Address:No.89 Suxi Road.Huazhuang Town,Binhu District,Wuxi City
Tel:+86-510-85601018 85615889
Wuxi Wuye Metal Rolling Co.,LTD.
Address: Wuxi New&Hi Tech Development Zone (ShuoFang Town)
Tel: +86-510-85311517 85310518
Tel: +86-510-85609898
Our products cover 4-hi cold mill,6-hi cold mill, 8-hi codl rolling
mill, 12-hi cold rolling mill, 18-hi cold rolling mill , 20-hi cold
rolling mill, three-continous rolling machine, four-continous rolling machine and
five-continous rolling machine as well as other series.In
additional,our company can produce pinch pass
mill.bending-straightening machine,multi-coil splitting
machine,acid etch device and other fitting of rolling
machine.Products are applicable for middle-size and wide strips
from 450-1450mm.They can be used to roll common steel,stainless
steel,copper and aluminum.Our company can conduct turnkey projects
for installation ,commissioning and handover complete unit.
President Haoran Zhou.and General manager Xiaozhong Chen with all
staff sincerely and warmly welcome foreign and Chinese customers
for negotiation and cooperation.
Company tenet:Quality and credit in first place,tracing
service,harmonious friendship