8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat
Brand Name:Huitian
Model Number:8667
Minimum Order Quantity:1000 Pcs
Delivery Time:15 days
Payment Terms:L/C, T/T
Place of Origin:CHINA
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai
Address:
No. 251, Wenji Road, Songjiang District, Shanghai China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Huitian® 8667 is a two-component polyurethane bonding adhesive that can bond a wide range of materials. Good adhesion to most plastic substrates (Polyester, PP, PP+LGF, SMC, ABS, ASA, PC+ABS, PC, etc.) after flame or plasma treatment.
Typical applications
Bonding of steel plates, aluminum plates, galvanized steel plates, cement, ceramics, wood, glass, glass steel and other materials.
Properties before curing
Typical value Range
Appearance Part A: Black
Part B: Beige
Chemical composition Part A: Hydroxyl
Part B: Isocyanate prepolymer
Density (g/cm3) Part A: 1.2-1.3
Part B: 1.4-1.5
Viscosity Pa·s Part A: 30-50
(Brookfield RVT7# Part B: 20-40
50RPM, 25℃)
Properties after curing
Typical value Range
Operating time (min) 4 3-5
Position time (min)* 30 28-35
Cure time (d) 3 (@25℃) ≥3
Shear strength
(25±2℃, 3d) MPa 3 ≥3.0
Tensile strength
(25±2℃, 3d) MPa 4 ≥3.5
Elongation at break 200% ≥180%
Hardness (Shore A) 70 65~75
*25 ℃ curing 30min to achieve the initial bonding strength, increase the curing temperature, can shorten the time to achieve the initial bonding strength, 60-80 ℃ curing 2-5min can achieve the initial bonding strength.
Directions For Use
Clean-up: Clean up the surface to be bonded, making it clean and dry, flame or plasma treated.
Glue preparation: Prepare the glue as per the ratio of A: B=0.85:1(W/W) 1:1(V/V) and mix evenly.
Gluing: Evenly apply the mixed glue on the part to be glued, and the mixed glue color is gray.
Curing: Determine the appropriate pressing temperature and time according to the actual process rhythm, otherwise bonding failure may occur.
Cautions
Keep away from children for storage.
If eyes or skin are accidentally exposed to the product, rinse immediately with water.
Please consult the MSDS of the product for safety information.
Storage & Transportation
| Recommended transportation environment | Optimal environment: 8~28°C, <70%RH; avoid sunshine, rain, humidity, impact, and extrusion of packing. |
| Recommended storage temperature | 8~28°C |
| Storage environment | Cool, dry |
| Shelf life | 6 months |
Packing Specification
Dual Cartridge: 400 ml
8667 A: 23kg/barrel 8667 B: 27kg/barrel
Waste Disposal
If not polluted by other substances, the waste can be stacked in landfill in principle and will not pollute water quality. Since the product can be burned, the waste can be disposed of in a waste incineration plant. Undoubtedly, it is necessary to abide by the environmental regulations of the local government.
Health And Safety Information
Before operating this product, it is necessary to get familiar with its hazards, proper use and disposal, and other relevant information. The following information may be useful: Material Safety Data Sheets (MSDS) and product classification marks. For more detailed information, contact your sales representative or technical service representative.
8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat
Inquiry Cart
0