7401 Medium Viscosity Cyanoacrylate Adhesives , surface insensitive cyanoacrylate Glue

7401 cyanoacrylate adhesive Is a single component, medium viscosity, surface insensitive cyanoacrylate.

Typical Applications

Suitable porous, acid and absorbent inert materials, difficult sticky materials fast, high-strength adhesive

Before solidification characteristics

Typical values range

Appearance colorless transparent liquid

Base material chemical composition α- cyano-acrylate

Viscosity (mPa.s)

(GB / T2794-1995)

Brookfield RVT

2 # rotor 20 rpm 100-300

Density (g / cm3) 1.06

(GB / T13354-1992)

Flash Point (℃) 80 ~ 93

(SH / T0733-2004)

Gap fill (mm) 0.15

Fixed time (s)

Steel 20-45

Aluminum 2-10

ABS 1 ~ 5

Polycarbonate 5-10

After curing characteristics

Full cure time at room temperature (h) 24

Tensile shear strength (MPa)

(GB / T 7124-1986)

Steel 14 ~ 23

Al 2 to 11

ABS 7 ~ 15

7 to 15 Polycarbonate

Working temperature (℃) -54-80

Chemical / solvent resistance

Solvent Temperature (℃) have left initial strength ratio (%)

100h 500h 1000h

Oil 40100100100

Leaded gasoline 23100100100

Ethanol 23100100100

Isopropanol 23100100100

Ethylene glycol: water 23 100 100 100

(1: 1)

Hot / wet 95% 40,827,675

Instructions

In order to achieve the best bonding effect, is the surface to be cleaned before the adhesive stick back to the days 7755 recommended to improve the cleaning effect of the cleaning agent to remove oil, impurities and dried. Try to expose a fresh surface grinding. Glue evenly applied to be part of sticky, immediately close the alignment, plus beat together. Excess glue before curing can not dissolve with acetone or ethyl acetate, to clean up.

This product is the best adhesive gap is less than 0.05mm effect.

To ensure the system to achieve optimal bonding strength, and the best layer resistance to media performance, it is recommended curing time in more than 24 hours to ensure complete curing adhesive layer.

Attention

Store away from children.

This product contains α- ethyl cyanoacrylate, the eyes have a stimulating effect on the skin. Recommended for use in a well-ventilated place.

In case of contact with eyes and skin, immediately rinse with water.

Product safety information, please refer to the product MSDS.

packing specification

ordering no.:740101,20g/bottles,10bottles/box

Storage condition

Best stored at 3-8 ℃ cool dry place.

Storage period of 12 months.

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude