1420 White (A) / Blue(B) Industrial Acrylic Adhesive for Transport vehicles , notebook computer

1420 High performance structural bonding acrylic adhesive

Typical Applications

Transport vehicles, notebook computer, mobile phone and other products such as structural adhesive bonding electrons.

Bonding material: ABS, glass steel, polyester (DCPD modified) polystyrene, polyethylene ester, PVC, polyurethane, coating

Carbon steel, aluminum and stainless steel recommended HuiTian primer 1020.

Surface treatment:

Remove dust, water, oil from surface; maintain the adhesive surface clean, carbon steel, aluminum and stainless steel recommended Huitian primer to reach 1020 best bonding results.

Mixing Adhesive:

Through a fixed mixing ratio of the mixing nozzle mix, with manual, pneumatic or equipment gluing

Gluing:

This product at 18 ℃ -27 ℃ environment construction to achieve the most ideal curing effect, below 18 ℃ curing slower, more than 27 ℃ curing faster. Effects of A and B components of the viscosity is affected by temperature, in order to ensure the measurement / consistent, effect of mixing equipment, the two components in the storage temperature to maintain a constant.

Gluing work must finish in operation time. Operation before the end of time, glue and positioning of the work piece to accurately completed, then keep the work piece in a fixed state until the end to remove positioning time.

Clean:

Before curing is easier to clean, wipe the lotion, overflow adhesive residue available containing citric acid, terpene resin or NMP degreasing agent scrub in order to achieve the best results. If the layer has been cured, carefully will layer off, and wipe the lotion good cleaning effect.

Matters need attention

1．This product is flammable, away from heat and flame, spark store or use.

2．Not including the adhesive materials: PP, PE, POM, PTFE, copper, brass

3．All stainless steel, aluminum, mixing equipment be Teflon or PE material. Filler, pump shall not use copper or copper alloy. The sealing ring must use Teflon, Teflon coated PVC, PE/PP, VITON, NBR, chloroprene rubber or other elastic body shall not be.

4．This product is curing very fast, generates a lot of heat when mass mixing, and may be accompanied by release of gas, steam and other volatiles. Therefore, should be in every time limited quantity in mixed operation time can run out, and the adhesive thickness is controlled within 3.2mm

Package

50ml/ Double tube, 12 double tube /carton.

380ml/ double tube, 12 Double tubes /carton

Storage

1.Store it in dry and shady places at the temperature of 12~24℃ is best

2.A component Ø Storage life: 12 months,,B component 9months

3. Could not frozen storage

Introduction

Huitian New Material is a high-tech enterprise group specializing in the research, development, and production of adhesives and new materials, with stock code 300041.

It has industrial bases and R&D centers in Shanghai, Guangdong, Jiangxi, and Hubei. The company has passed ISO9001, ISO/TS16949 quality management system certification, and ISO14001 international environmental management system certification.

Huitian products have passed SGS, TUV, IATF, JET, CQC, GL, JG, UL, DIN, NSF, FDA, LFGB, API, and other certifications.

One of the critical suppliers of adhesives and new materials in China's 5G communications, consumer electronics, new energy vehicles, rail transit, photovoltaics, packaging, construction, and other industries.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude