Industrial Strength Adhesive Glue , polyurethane adhesive 917 for engineering machinery

Huitian Industrial Adhesive Glue , polyurethane adhesive 917 for engineering machinery

Huitian polyurethane adhesive 918A

HT918A is a single component, black, low viscosity, high strength, low odor polyurethane adhesive. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance.

Typical use

Assembly adhesive used for engineering machinery, automobile, shipbuilding and other cab windshield, and the bonding part of the metal structure of the seal.

Characteristic before curing

Representative value range

A component

Color Black

Density g/cm3(25℃) 1.85 1.15~1.25

(GB/T13354-1992)

Touch Curing(min) 40 20~60

(23℃/50%RH)

(GB/T13477.5-20)

Characteristic after curing

Tensile strength (MPa 6 ≥ 5

(GB/T528-1998)

Elongation at break (%) 500 ≥ 450

(GB/T528-1998)

Tear strength KN/m 25 ≥ 20

(GB/T 529)

The shear strength of /MPa 4 ≥ 3

(GB/T 7124)

Harness: Shore-D(GB/T 531-1999) 50-65

Work Temperature℃ -40~90

Instructions for use

Surface cleaning: clean surface: remove the rust, dirt, water and oil etc..

Sizing: cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

Bottom: to be with the back glass processing agent uses the specified. Glass processing agent to wait for the volatile drying time routine for 10-30 minutes, depending on the specific time when the environment temperature and decide, after the primer coating evaporation drying after the start of sizing.

Curing: a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

Polyurethane adhesive in sizing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

Storage: unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove afternormal use, does not affect the product performance.

The matters needing attention

Keep away from children.

If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.

If the case of contact with eyes, rinse immediately with water, and medical treatment.

Recommended for use in a well ventilated place

Product safety data please refer to the product MSDS.

Package

310ml/Tube,24tube/Carton

Storage

Store in cool and dry place 5-25 C

Storage period: hard pack for 9 months.

Introduction

Huitian New Material is a high-tech enterprise group specializing in the research, development, and production of adhesives and new materials, with stock code 300041.

It has industrial bases and R&D centers in Shanghai, Guangdong, Jiangxi, and Hubei. The company has passed ISO9001, ISO/TS16949 quality management system certification, and ISO14001 international environmental management system certification.

Huitian products have passed SGS, TUV, IATF, JET, CQC, GL, JG, UL, DIN, NSF, FDA, LFGB, API, and other certifications.

One of the critical suppliers of adhesives and new materials in China's 5G communications, consumer electronics, new energy vehicles, rail transit, photovoltaics, packaging, construction, and other industries.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude