40U 19" Thermostatic Sandwich Outdoor Electrical Cabinet Emerson Power System Monitoring Unit

Brand Name:ESTEL
Certification:ISO9001
Model Number:ET9090210-EQ3
Minimum Order Quantity:1PC
Delivery Time:15 to 20 days
Payment Terms:T/T, L/C, D/A, D/P, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN
Supplier`s last login times: within 35 hours
Product Details Company Profile
Product Details

40U 19" Thermostatic Sandwich Outdoor Telecom Cabinet With Emerson Power System, Monitoring Unit


Cabinet configuration list


Cabinet typeConfigurationQuantitySpecifications
Main cabinet19 inch standard rack140U
Illumination148V DC, LED light
Air conditioner1Input voltage: AC220V 60Hz, cooling capacity: 1500W
Emergency fan248VDC, bottom plate air intake
Grounding copper bar1M6 bolts 10
Busbar1M6 bolts 10
AC and DC power distribution unit1

AC input: 63A/2P*1;

AC output: 63A/2P*1;

DC input : 63A/1P *1;

DC output : 16A/1P*1;

DC output : 10A/1P*3;

DC output : 6A/1P*3

Circuit breaker brand: Schneider

Socket18 -bit universal socket, 220V 16A
Embedded power supply1

Model: NetSure211 C46

DC48V, 60A, 3U

distribution unit *1

20A rectifier module *3

monitoring module *1

Brand: Emerson

Environmental monitoring system1

1* environment monitoring unit, 1U, SNMP communication;

1* smoke sensor;

1* water sensor;

1* temperature & humidity sensor;

1* tilt & shock combination sensor;

1* door sensor

power supply: DC48V

Base sealing plate11 set containing 6, before and after one, two right and left

Appearance





Cabinet material


Sanwich structure panel, galvanized steel, double wall with heat insulation


Cabinet installation

Unpacking

Outdoor integrated cabinets are generally packed in wooden cases. When disassembling the package, take care to avoid damage to the cabinet.



Cabinet base

The size of the base of the cabinet and the fixing hole of the base expansion bolt are shown in Figure .


2.3 Cabinet fixing

( 1 ) According to the hole position map or the scribe template of the cabinet base, the base expansion bolt hole of the cabinet is punched with a hammer drill in advance, and the diameter of the hole is referenced to the size of the expansion bolt;

( 2 ) First, fix the leftmost or rightmost first cabinet with expansion bolts, place the remaining cabinets one by one, and finally fix the cabinets with the expansion bolts.

( 3 ) If you need to seal the base of the cabinet, use the base sealing plate (optional) to seal the notch and hole around the base. The mounting screws are the M5 stainless steel screws in the cabinet attachment (see Figure 5 ).

Note: If the cement foundation is not flat, it is recommended to use a gasket or spacer to level the base of the cabinet.

Figure 5


Note: When crossing the wire loop, first cut the cross with a utility knife. After the cable is connected, seal the remaining gap on the wire loop with the sealing glue attached to the cabinet.,As shown below;




China 40U 19 Thermostatic Sandwich Outdoor Electrical Cabinet Emerson Power System Monitoring Unit supplier

40U 19" Thermostatic Sandwich Outdoor Electrical Cabinet Emerson Power System Monitoring Unit

Inquiry Cart 0