Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55

Brand Name:ESTEL
Certification:ISO9001
Model Number:ET9090210-UP2
Minimum Order Quantity:1PC
Delivery Time:15 to 20 days
Payment Terms:T/T, L/C, D/A, D/P, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN
Supplier`s last login times: within 35 hours
Product Details Company Profile
Product Details

Sandwich Structure Panel Outdoor Power Supply Cabinet With Emerson Rectifier and Battery


1 Product description

1.1 Appearance

After the cabinet is installed, as shown in Figure 1 and Figure 2



Figure 1 Figure 2


1.2 Cabinet configuration

The outdoor integrated cabinet configuration of this project is as follows:


Cabinet typeConfigurationQuantitySpecifications
Main cabinet19 inch standard rack131U
Battery holder11 layer W×D×H 800×800×350 mm
illumination148V DC, LED light
air conditioning1AC 220V input, cooling capacity 1500W
air conditioning1DC 48V input, cooling capacity 300W
Grounding copper bar1M6 bolts 10
Busbar1M6 bolts 10
AC and DC power distribution unit1

AC input: 63A/2P*1;

AC output: 63A/2P*1;

DC input : 63A/1P *1;

DC output : 16A/1P*1;

DC output : 10A/1P*3;

DC output : 6A/1P*3

Circuit breaker brand: Schneider

PDU18 -bit universal socket, 220V 16A
Embedded power supply1Netsure211 C46 / DC48V / 60A / 3U / rectifier module 20A with 3 / Brand: Emerson
battery4SP12-65/12V/65Ah/ size: 350*167*185/ Brand: Shandong Shengyang
Environmental monitoring system1GMU/ smoke, flooding, temperature and humidity, tilting vibration, access sensor
Base sealing plate11 set containing 6, before and after one, two right and left

1.3 Cabinet size

The size of a single cabinet is shown in Figure 3 . External size: W×D×H 905×905×2107mm



Figure 3


1.4 Cabinet material


Sanwich structure panel, galvanized steel, double wall with heat insulation


2 Cabinet installation

2.1 Unpacking

Outdoor integrated cabinets are generally packed in wooden cases. When disassembling the package, take care to avoid damage to the cabinet.


2.2 Cabinet base

The size of the base of the cabinet and the fixing hole of the base expansion bolt are shown in Figure 4 .

Figure 4


2.3 Cabinet fixing

( 1 ) According to the hole position map or the scribe template of the cabinet base, the base expansion bolt hole of the cabinet is punched with a hammer drill in advance, and the diameter of the hole is referenced to the size of the expansion bolt;

( 2 ) First, fix the leftmost or rightmost first cabinet with expansion bolts, place the remaining cabinets one by one, and finally fix the cabinets with the expansion bolts.

( 3 ) If you need to seal the base of the cabinet, use the base sealing plate (optional) to seal the notch and hole around the base. The mounting screws are the M5 stainless steel screws in the cabinet attachment (see Figure 5 ).

Note: If the cement foundation is not flat, it is recommended to use a gasket or spacer to level the base of the cabinet.

Figure 5


Note: When crossing the wire loop, first cut the cross with a utility knife. After the cable is connected, seal the remaining gap on the wire loop with the sealing glue attached to the cabinet.,As shown below;



3 Device debugging

3.1 Air conditioner

Refer to the attached Cabinet Air Conditioner User Manual for relevant.


4. Cabinet picture



China Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55 supplier

Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55

Inquiry Cart 0