Product Details
Custom Control Cables Clutch Cable For Trucks / Buses / Boat / Farm
Tractor
This series is customized, special needs for different customers.
【 Applications 】 • Aircraft • Throttle • Fuel shutoff • Feedback • Rudder trim • Emergency elevator control • Free fall landing gear • Emergency vent • Window latch • Flap control
【 Material 】 • Various | | • Arresting gear • Potable water control • Waste drain control • Landing gear interlock • Escape slide actuation • Slat skew detection • Tail cone release • Nose gear down lock indicator and many others
【 End Fittings 】 • Full Range
|
【 Part Number Code 】
Construction — Sample Part No. 173
173 – Utility with stainless end rods.
174 – Utility with stainless support tube and stainless armor
innermember.
313 – Low-Friction EXT with all plastic wear surfaces and stainless
steel end rods.
314 – Low-Friction EXT with all plastic wear surfaces, stainless
steel end rods and stainless steel swivel support tubes.
Duty (Load carrying capacity)— M
Available in: V (Very light duty), L (Light duty), M (Medium duty),
H (Heavy duty).
Determine by load or end rod diameter from table A below.
Conduit End Fittings — TG
TT (Threaded fittings both ends), GG (Grooved fittings both ends),
TG (Threaded fitting one end and Grooved on the other). See table A
and diagram B below for dimensions.
Length of Travel— 2
1 to 6 inches. Determine from table A and diagram C below.
Length Overall (Inches) — 90
【 Load Capacities And Length Of Travel 】
【 Conduit End Fittings 】
Type T
Threaded Conduit End Fitting for bulkhead mounting.
Type G
Grooved Conduit End Fitting for mounting with U-bolts or clamps.
【 Overall Length And Travel In Inches 】
FOR REPLACEMENT CABLES
A. Remove old cable.
B. Measure length as shown below.
C. Measure length of travel. 1” through 6”.
D. Determine size of thread “F.” Select basic part number from
table above.
FOR NEW CABLES
A. Determine overall length.
B. Measure travel required. Add ¼” and then round upward to nearest
whole inch.
C. Determine loads and select basic part number from table A.
【 Locally Assembled Control Head Cables 】
Utility & Low-Friction EXT 1", 2" and 3" travel 2" min. bend radius on VLD 3" min. bend radius on LD 60 lb. load rating | How to Order 1. Select the basic part number. 2. Indicate travel per example below. 3. Indicate length in inches. Part Number Code Example: | |
*3 = Stainless steel end rod **4 = Stainless steel end rod, support
tube and innermember armor
Company Profile
Phidix Motion Controls (PMC) started the business in 2004,
originally as an international trading company-Shanghai Phidix Trading Co., Ltd (Headquarter of PMC), and became the only authorized Cable
Assembler in China by the American based company Cablecraft Motion
Controls (CMC) in 2011.
CMC was originally a subsidiary of Tuthill Group (more than 100
years history), headquartered in New Haven Indiana US and became
independent in 2011. CMC can offer diverse high-end drive control
products and engineering solutions. The product line includes
control flexible shaft of the various specifications, cab units and
a category range of standard parts, widely used in high-end
industrial customer markets, such as luxury bus, heavy truck,
aerospace, construction machinery, rail transportation,
agricultural machinery, gardening equipment, racing cars, military
vehicles, tanks etc. as selection of shift control, throttle cable,
clutch cable, brake line, valve and other mechanical transmission
controls.
Just after CMC became the independent group in 2011, PMC became the
only authorized Assembler in China responsible for the
manufacturing, assembly, sales, technical support, after-sales
service of control items from CMC, acted as the multi-functional
management and development center (PMDC) for the R&D of
creative control technology, parts manufacturing, cable assembly
and the import and export business as well.
Today, thousands of personalized products designed and produced by
PMC in China are selling to all over the world.
HONOR