

Add to Cart
CT360mm Rubber Track Pads Chain on Type for Large Machinery
ABOUT PADS
Rubber track pads can be added to steel tracks to increase traction
and protect hard surfaces such as asphalt and concrete,
and to minimize turf damage on various worksites. Rubber track pads
can also be used for increased traction on hard,
abrasive surfaces.
1. Chain on rubber track pads are most commonly found on excavators
and some newer machines.
Sometimes referred to as “Road Liner” pads, these bolt directly to
the steel chain of the undercarriage.
These pads can also be used to replace other chain type pads such
as those found on newer CAT machines with the “webbed” style CAT
pads.
Advantages to Chain-mount pads is that the steel portion of the
tracks are completely enclosed by the rubber.
If a machine’s track brushes against a curb then it will be
protected from the side.
Chain on rubber pads come the closest to mimicking a continuous
rubber track while maintaining the durability of a steel
undercarriage.
2. The rubber track pad chain on type is easily attached to the
steel chain by having threaded studs located at the rubber pad,
bolted through pre-drilled holes in the rubber pads.
Most machines already have these holes pre-drilled by the
manufacturer or the holes may always be drilled into the track
chains for later use.
This rubber pad for steel excavator tracks are available for a wide
variety of machine makes and models.
SPECIFICATION
Chain-on | ||||||||
Type | Pitch | D | d | S | Bolt | L | W | H |
300C | 135 | 144 | 116 | 22 | M12 | 300 | 95 | 45 |
400C | 135 | 94 | 64 | 46 | M12 | 400 | 125 | 52 |
400CA | 135 | 99 | 72 | 43.5 | M12 | 400 | 125 | 52 |
400CK | 135 | 100 | 73 | 43.5 | M12 | 400 | 125 | 52 |
400CB | 135 | 104 | 80 | 46 | M12 | 400 | 125 | 52 |
400CD | 135 | 110 | 80 | 46 | M12 | 400 | 125 | 52 |
400CV | 135 | 106 | 76 | 46 | M12 | 400 | 125 | 52 |
400CK | 140 | 80 | 80 | 52 | M12 | 400 | 125 | 52 |
400CW | 140 | 86 | 86 | 52 | M12 | 400 | 125 | 52 |
450CN | 140 | 83 | 83 | 52 | M12 | 450 | 125 | 52 |
450CW | 140 | 86 | 86 | 52 | M12 | 450 | 125 | 52 |
450CA | 135 | 99 | 72 | 43.5 | M12 | 450 | 125 | 52 |
450CB | 154 | 90 | 90 | 46.3 | M14 | 450 | 146 | 55 |
450CD | 154 | 90 | 90 | 55 | M14 | 450 | 146 | 55 |
450CS | 154 | 73 | 73 | 57 | M14 | 450 | 146 | 55 |
450C | 154 | 89 | 73 | 57 | M14 | 450 | 146 | 55 |
500CW | 135 | 104 | 80 | 46 | M12 | 500 | 125 | 52 |
500CB | 175 | 102.4 | 86.4 | 57 | M16 | 500 | 162 | 69 |
500C | 171 | 108 | 108 | 60.4 | M16 | 500 | 162 | 69 |
500CS | 171 | 104 | 88 | 58 | M16 | 500 | 162 | 69 |
500CA | 190 | 160.4 | 124.4 | 62 | M20 | 500 | 178 | 72 |
500CD | 190 | 155.6 | 119.6 | 69 | M20 | 500 | 178 | 72 |
600C | 171 | 108 | 108 | 60.4 | M16 | 600 | 162 | 69 |
600CD | 190 | 155.6 | 119.6 | 69 | M20 | 600 | 178 | 72 |
600CA | 190 | 160.4 | 124.4 | 62 | M20 | 600 | 178 | 72 |
600CB | 190 | 160.4 | 124.4 | 62 | M18 | 600 | 178 | 72 |
300 | 155 | 88.9 | 88.9 | 57.1 | M12 | 300 | 186 | 55 |
320 | 155 | 104 | 88.9 | 55 | M12 | 320 | 186 | 55 |
Steel material