Fully Automatic Motor Winding Machine 8kw Teeth Winding For Coated Stator Stack
Brand Name:WIND AUTOMATION
Certification:CE
Model Number:WIND-NR148-1
Minimum Order Quantity:1 PC
Delivery Time:30 working days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Supplier`s last login times:
within 36 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Stator Winding Machine To Make Coils On Teeth Electrostatic Coating Of The Slots WIND-NR148-1
Stator Teeth Winding Machine Application:
Make coils on teeth for inslot stator such as 36 slots stator,
Stator Winding Machine Parameter:
| Model | WIND-NR148-1 |
| Winding Stack | Inslot stator |
| Station | Single station |
| Wire diameter | 0.1-1.2mm( according to stator slot filling rate and slot width) |
| Stator Size | Outer diameter: Max 230mm (9.055'') Inside diameter:Min.10mm (0.394'') Stack weight:Max 10KG (lbs) Stack length:Max 100mm (3.94‘’) |
| Program setting | The maximum step is 200 steps. The system program stores 10 sets, which is larger than the storage can be uploaded by the computer and downloaded with unlimited storage. |
| Winding speed | Max.400rpm(according to wire size,stack length and stator size) |
| Axis | 4 axis |
| Total Power | 8KW |
| Input | AC380V ±10%3 phase 50/60Hz |
| Air source | 0.4~0.7Mpa |
| Machine size | About 1000(W)×800(D)×1800(H)mm |
Question and Answer:
1. What is the winding cycle time of below brushless motors?
The stator has 230 mm outer diameter.
The inner diameter is 167.2 mm.
The length of the stator is from 10 mm to 100 mm, but now we have
orders for 10 mm length stack.
There are 40 turns per each teeth with 4 wires 0.4 mm diameter in
parallel.
Cycle time: For winding each stator mentioned above it cost 10 minutes per piece
2. Do we need to use electrostatic coating of the slots in order to use your machine?
The machine is desiged per your biggest stator length, for such a
big stator, it must be very heavy
at least 5KGS,So during winding, we need to add a reducer to let
the winding smooth and not influenced,
There are 40 turns per each teeth with 4 wires 0.4 mm diameter in
parallel.
Your wires and turns is too much for the slots area,
The up layer wire will press the down layer wire,
Up layer wire will fell down,
Wind Automation Suggestion:
1. We suggest insulation cap and we can design the cap
If the winding demonstration shows that insulation cap is necessary
You may refer to the 36slots electrostatic coating stator winding machine video,
It is the same winding way as yours but it have much little turns
(less than 30turns)
2. If you don't want to invest the tools to make the plastic caps
and
The material should resist to 155 Celsius degrees
Can you use 0.7mm to 0.8mm single wire instead of
using 2 wires with 0.56 mm diameter or 4 wires with 0.4 mm diameter
Below samples and drawing are needed for machine manufacturing and commissioning:
1. CAD drawing of stator lamination for checking slot filling rate
2. Winding diagram
3. Copper wire 1 roll enough for winding 2pcs stators
4. Does the stator have positioning slotting place
Main Parts
| No. | Name | Brand | Remark |
| 1 | PLC | YASKAWA | |
| 2 | Servo Motor | YASKAWA | |
| 3 | Touch screen | Weinview | |
| 4 | Sensor | OMRON | |
| 5 | Electric units | Schneider | |
| 6 | Pneumatic units | Xinchen | |
| 7 | Ball bearing | NSK | |
| 8 | Screw guide | HIWIN | |
| 9 | Timing belt | Gates | |
| 10 | Power supply | Mean Well | |
| 11 | Tensioner | ETA-1000/L-R | |
| 12 | Reducer | Nidec-SHIMPO | Heave stator need motor reducer |
Please click below picture to view video of 36slots stator winding machine
This needle winding machine with four axis servo device can winding, indexing, put the wire, demolding automatically, The standard type is flexiable to change tooling for BLDC stator with OD below 120mm (4.72''), ID 10mm (0.39'')to 100mm(3.94''), height 100mm(3.94''), Max stator stack weight:3KGS ( 6.6 lbs)
Fully Automatic Motor Winding Machine 8kw Teeth Winding For Coated Stator Stack
Inquiry Cart
0