Starter Armature Testing Equipment Spins Rotor During Double Station WIND-ATS-02
Brand Name:WIND AUTOMATION
Model Number:WIND-ATS-02
Minimum Order Quantity:1pc
Delivery Time:35 working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
Starter Armature Testing Machine Belt Spins The Rotor During The Test WIND-ATS-02
Application:
Starter armature upto 36 slots
covering 13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)
Advantages:
1. Moden concept initial positioning, comparing to tranditional starter armature tester,
the operator no need to check initial positioning manually,
Make the testing convenient and easier.
2. 100% Satisfied feedback from starter armature manufacturers.
Question and Answer:
About you testing machine, could you explain me better about that belt which spins the
armature during the test? Why need to spin, is it better than the common ones?
You asked a good question about the belt for spin, Yes, it is better than the common ones,
The armature tester WIND-ATS-02 belt spin is for automatical
positioning the armature slot,
as you may see some universal armatures have obvious slots for
positioning while starter armature
don't have obvious slot groove for positioning,
If without the automatical positioning, the operator need to
position armature on purpose every time he
load on the armature.
Technical Data:
| Test Items | Test Description | Test result |
| Bar to Bar resistance | 0.01mΩ~10mΩ | ≤±0.5% Full scale |
| Welding resistance | 0.01mΩ-10mΩ | ±10μΩ |
| 180℃ cross resistance | 0.01mΩ-10mΩ | ≤±1.5% Full scale |
| Surge | 100-1000Vpp (Max 36sets waveform) | ±5% |
| Isolation resistance | DC 500V | 0.1-500MΩ ≤±5% Full scale |
| Hipot | AC 100-1000V | 0-20mA ≤±.5% Full scale |
1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)
Four-terminal measurement to ensure accuracy
2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)
Six-terminal measurement to ensure accuracy
3. Cross resistance 0.01mΩ-10mΩ
Four-terminal measurement to ensure accuracy
4. Surge 100-1000V (100V/time)
Pulse crest:0.5u sec, Frequency 1~40MHz
Standard waveform is Write, OK waveform is Green, NG waveform is Red
5. Isolation resistance DC 500V
Testing time:1~10s (0.1s/time)
Range:1~500MΩ
Accuracy: ≤±5%
6. Hipot AC 100-1000V
Testing time:1~10s (0.1s/time)
Armature commutator bars ≤ 36 bars
Testing panel cycle time: 8~9s (according to 33bars)
13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)
Main Configuration:
15’’ Touch screen Sampling Chip: BB Relay:NAIS High voltage relay:Meder
Pneumatic parts:Airtec
Power: AC 220V,50Hz
Air pressure:0.4~0.6MPa
Temperature:0~45℃
Dimension: 950mm*1250mm*580mm
HS Code:9030390000
After Sales Example
We received attached photo and video from your engineer today,
Our engineer confirmed this cylinder nut was adjusted out of
cylinder stroke range because of your engineer's improper operation
(the nut and cylinder is a whole set),
You may need to send the whole cylinder with nut for us to repair
or replace it,
The related cost will be beared by your company, please be noted,
And please inform your engineer to operate the machine in a proper
way,
Thank you for your coorperation!
我们工程师确认贵司工程师发过来的气缸被调整到超出了行程,导致气缸无法工作(螺帽为气缸上的一个部件,它们是一个整体).
我们工程师确认这个气缸已经调试过,不需要再调整.即使要调整,也是微调,不能超过行程.
解决方案: 整套气缸寄过来修理或者更换,
因不当操作需要更换零件和工程师上门,我司需要收取费用.
而且这款气缸是外购件,已经过了保修期,如需要修理或更换,气缸供应商会收费.
Starter Armature Testing Equipment Spins Rotor During Double Station WIND-ATS-02
Inquiry Cart
0