Heat Resistance Polyester Mesh Belt , Flat Surface Monofilament Mesh For Food Industry

Polyester monofilament Dryer Screen Conveyor Belt for food industry

1. Product Model:Polyester Dryer Screen Conveyor Belt

2. Quality: All goods will be tested by our professional QC team before balance payment and

shipping.

3. Payment: T/T, L/C, D/P, Western Union, Paypal, Escrow, Cash.

4. Samples: Samples for quality testing are available, about the sample fee and

freight,hoping we can understand with each other,sometimes sample is free of charge, but we

kindly ask you to pay for the freight.

5. Packing: Kraft paper or plastic blister film inner package, then paper box or wooden

cartons for outer package, try to save space to make compact package.

6. Shipping: Air Express, Sea Shipping and TNT,DHL,FEDEX,UPS,EMS

7. Warranty: 6 months quality warranty

8. Serivice: We have a best sales services team with rich experience , and will solve all the

problems for you now and in the future.

Instructions and Attentions

1. Open the package put the belt lay on the floor Check the dimension is the correct size you needed

2. Put one end of the belt along the running direction of the Filter and lead into the roller.

Following the Filter instructions put the belt goes through each roller.

Attention:"Cake Side”should be the touch side contact with the sludge.

The arrow direction shows correct belt running direction.

3. Align the two ends of belt,put the hinge pin through the seam from one end to the other.The hinge pin may have some obstruction when go through in the middle.You can use pincers clamp one end of hinge pin and help push forward to the other end.When you align the two ends make sure the contact two ends are in same width.

4. Bend two ends hinge pin back to the seam and clamping tight.

5. Take out the glue which send together with the package.Put the glue evenly into the seam and scrape the glue make sure the seam surface is flat and smoothly.Only running the belt after the glue is completely drying.

6. Following the Filter operation instructions,tight the belt and running the belt 4 to5 rounds with low speed.Make sure the belt no strange,and then you C an tur n up to the normal speed.

7. Belt running should away from the sunny skies condition.No sun exposure.

Gently handing when you moving the belts,Non-throwing,Non-rolling.Non dragging

Keep away from the strong acids,alkali and organic solvents when you store.

As the young pioneer enterprise in the environmental protection industry, Shanghai ShengXuan Environmental Engineering Co.,Ltd adheres to the policy of putting people first and giving priority to science and technology and devotes itself to the devotes itself to the development and manufacture of series kinds bag filters and accessories which can be widely used in dust and liquid filtrations.

Now ,we have Three main parts products have been recognized and approved by users all over the world.

Dust bag filter industries

We produce the dust filter bags from the needle felts to the filter bags in whole own design and techology, FMS, Fiberglass,PPS, Nomex, P84,PTFE ,PET/PP which widely used in power, metallurgy,building materials, cement and chemical indstries. In the same time, we also provide the technology service, maintenance service in customers site factory.

Fluid /liquid bag filters

From the liquid bag filters to the bag filter housings, produced by ourselves.

Conveyor belts industries

Polyester woven belts, air slide belts, conveyor belts , can be used in all conveyor industries.

We Sheng Xuan is determined to provide the air and water pollution control industry with best quality products and services.