

Add to Cart
Wall Mounted Dental X-ray Machine
Product Description
Features
1. Using the international advanced technology,efficient integrated
design,high efficiency,low radiation.
2. Using microcomputer intelligent control,not only remote
controlled exposure,but more powerful function of low voltage alarm
and high voltage protection.
3. Micro focus technology,much more clear image and accurate
diagnosis.
4. The base has two modes of mobile and fixed ,pneumatic lift soft
ensures more convenient for dentist and more comfortable for
patient.
5. Can use light room dental film,imaging in one minute,maximum
convenient dentist to diagnose.
Can connect to dental digital imaging system,that is indispensable
for clinicians to diagnose and root canal filling.
Power supply | AC220V+10%,50Hz,1KVA |
Tube voltage | 70 kVp |
Tube current | 8mA |
Focus size | 1.5mm |
Total filtration | 2.5mmAL |
Exposure time | 0.2-4sec |
Leak radiation | Outside one meter<0.002mGy/h(National standard:0.25mGy/h) |
Optional: Tube current :0.5 mA Focus size :0.8 mm |
Precautions
1. In order to ensure safety in operation and use, good ground lead
must be installed well.
2. Because small X-ray machine's thermal capacity is limited,
attention should be paid to making the machine work intermittently.
3. Only during exposure process this machine will produce X-rays.
It won't produce X-rays in power-off state, neither in power-on
state as long as not in exposure.
4. If any unforeseen circumstances occur during correct use,
operators should cut off the power immediately and stop using the
machine. It cannot be used again until it is overhauled and
qualified.
5. Before leaving the factory, each X-ray device is equipped with
an additional filter plate with the following specifications:
1.0/0.5mm aluminum sheets.
6. Every time when disassembling the machine, disassemble the head
first and then other parts.
8. Every time after using the machine, recover the cross arm to the
highest point, and then place the machine head in an equilibrium
position.
9. Every time after using, sterilize and clean beam tube end that
contacts the patient with medical alcohol.
10. Clean the machine surface with a dry cloth every week and
inspect whether the connectors contact well.
11. Pay attention to machine maintenance. Check whether the
indicator lights, display, rotary knob, switch, and remote control
work normally; whether the X-ray source modules leak oil; whether
when X-ray source modules expose produces any abnormal noise; or
whether fixed screws in the mechanical part loose, and the like.
12. The rated capacity of the machine is 1.1 kw. Please select
power supply or power grid with a power supply capacity greater
than 1.5kw. If network voltage in this region is abnormal, we
recommend matching 1.5 KW or higher industrial voltage stabilizer,
to prevent damage to the machine and reduced machine life due to
abnormal voltage.
Our Advantage :
1: For all your inquires about us or our products , we will reply
you in detail within 24 hours.
2: We own professional team have professional attitude to recommend
products and services.
3: One year free warranty , after it is still providing after-sales
service .
4: We offer OEM services , Can print your own logo on the products
.
5: We have very experienced engineers , can help you better use our
products .