35Khz 40Khz Ultrasonic Cutter For Roller Blind Fabric Cutting Table

35Khz 40Khz Ulrasonic cutting device for roller blind fabric cutting table

Parameter

Description

The traditional control scheme of the slitting machine is to use a large motor to drive the shaft of the rewinding and unwinding, and a magnetic powder clutch is added to the reeling and unwinding shaft. The resistance generated by the magnetic powder clutch is adjusted to control the surface tension of the material. . Magnetic powder clutches and brakes are special automatic actuators. They transmit torque through magnetic powder filled in the working gap. Changing the excitation current can change the magnetic state of the magnetic powder, and then adjust the transmitted torque. It can be used for stepless speed regulation from zero to synchronous speed, suitable for fine-tuning of high-speed section and speed regulation system of medium and small power. It is also used for the unwinding or rewinding tension control system that adjusts the torque by adjusting the current to ensure that the tension remains constant during the winding process.

Slitting machine is a kind of mechanical equipment that cuts wide paper or film into multiple narrow materials, and is often used in papermaking machinery and printing and packaging machinery.
In the past, the speed of the magnetic powder clutch of the slitting machine could not be high, because it was easy to cause high-speed friction of the magnetic powder during operation, resulting in high temperature and shortening its life. Seriously affect the production efficiency. The main feature of the slitting machine is that the magnetic powder clutch acts as a resistance device, which is controlled by the system to output a DC voltage to control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive device and can control less tension.
Disadvantage: The speed cannot be high, and it is easy to cause high-speed friction of the magnetic powder during high-speed operation, resulting in high temperature, which will cause the magnetic powder clutch to heat up and shorten its life.
A device used to longitudinally cut a certain width of the coil with a knife and cut it into several narrower coils. After it is installed in a unit device such as a calender, an extruder, and a gluing machine, it can complete continuous strip cutting, often with a winding device. Slicing knives can be used with flat blade knives and round knives. Slitting machine series products of paper processing machinery: paper slitting machine, small paper slitting machine, web slitting machine, high-speed slitting machine, etc.

Features

Efficient----The fastest cutting can reach 10 meters per minute.
Intuitive----The adjustment operation is convenient and intuitive.
Quality----Automatic edge sealing, no burning, no blackening, no burrs.
Economical----automatic work, saving labor, one person can operate multiple machines.

Application industry

Velcro ultrasonic slitting machine is widely used in clothing industry, shoe and hat industry, luggage manufacturing industry, craft decoration industry, packaging industry and so on. Applicable to: Ribbon, cloth tape, Velcro, ribbon, satin ribbon, ribbon, etc.

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.