High Shielding Control Lightning Protector For Telephone Line IP20 Protection Degree

TRSS-485 control signal surge protection device

Model: TRSS-485

Color: white / red

Verification: CE

product description

The industrial control equipment is connected to the peripheral line through the power line and the signal line, and the working environment is relatively complicated, and is easily damaged by lightning and the like, thereby causing damage to the equipment. The function of the control signal lightning arrester is that when the transmission line is subjected to induced lightning and other transient overvoltage surges, the inrush current is discharged to the earth through the protection branch of the surge protector, and the output voltage is clamped to the device. Within the voltage range, it can effectively prevent this from happening and ensure the safety of the equipment.

Product specifications

Use attention

1. Connect the lightning protection device (SPD) between the line and the device port to be protected. Connect the grounding port on the SPD to the ground net with multiple strands of copper wire, and ensure that the grounding resistance is not more than 4 ohms.

2. When installing, make sure that the '1' screw is installed in place to make the line bond firmly. After installation, use a multimeter to test whether each signal line is turned on. Do not install the SPD with power, otherwise the SPD

3. The lightning protection device does not need long-term maintenance when it is not required to be installed. It only needs routine maintenance of the system; if there is a problem in signal transmission during use, the signal transmission returns to normal after replacing the surge protector. The surge protector is damaged and needs to be repaired or replaced.

Company Profile

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.