Single Channel Data Surge Protector , Rs485 Lightning Protection Network Surge Arrester

12V24V220V single channel power supply arrester video 485 control signal lightning arrester.

Product description

The control signal lightning arrester (SPD, surge protector) is mainly used in the data control signal of the industrial control system, the communication special line, the telemetry signal and the remote control signal. It is applied in the 1-2 and 2-3 areas of the lightning protection zone.

Working principle of product

The control signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.

Product features

1. with over current, over voltage and clamping three protection functions.

2. when lightning strikes and invades, no need to stop electrical equipment, and does not affect the operation of normal equipment.

3. The design of the appearance is novel and the volume is small.

Product specification

Use of attention

1. system signal lightning arrester can be installed in the LPZ0-1 area or directly connected to the front end of the protected equipment (or system), and the closer the better from the protected equipment (or system).

2. the control signal lightning protector can be conveniently fixed on the 35mm electric rail.

3. "IN" connects the lead end, "OUT" connects the protected equipment (or system) end, "1" and "3" as a signal channel, "2" and "4" as a signal channel. When installing, the two ends must be laid separately, and not be tied together to prevent the two induction.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.