

Add to Cart
small circuit breaker breaker DZ47 short-circuit protector for household total open air switch
Brief introduction
The DZ47 circuit breaker, or the small circuit breaker, is one of
the plastic case circuit breakers. It is the most widely used
terminal protection device in building electrical terminal
distribution device. For single phase and three phase short
circuit, overload, overvoltage protection and other protection
under 125A, it includes four kinds of monopolar 1P, bipolar 2P,
three pole 3P and quadrupole 4P.
Use of attention
1. There should be no significant vibration and shock at the .
installation.
2. check whether the technical parameters on the pad are in line
with the requirements.
3. the insulation resistance between the pole and pole (except the
monopole), the end and the outlet end of the circuit breaker should
be not less than 2M Omega, and the insulation resistance between
the pole and the shell, the pole and the installation rail should
not be less than 5M Omega. If the product is not required, the
product shall not be used and should be exchanged in time with the
supplier.
Product features
1.High capacity of rated short circuit
2. double connection function. It can connect standard remittance
and soft conductor conveniently.
3. use temperature control protection circuit, built-in thermal
protection
Product specification
1. Electric current: 10A/16A/20A/25A/32A/40A/50A/63A
2. Voltage: 230/400V
3. function: Short circuit / overload / isolation
4. Product material: PC flame retardancy
5. Connection mode: Fire line only
6. Arc extinguishing mode: Vacuum circuit breaker
7. Authentication: 3C
Working principle of product
A small circuit breaker is the principle that the bimetal bending
is directed regularly with the increase of temperature. When the
circuit breaker is closed in normal working condition, the internal
bimetallic sheet is heated by a certain current, and the thermal
expansion coefficient of the two bimetalles is different. It is not
enough to release the release mechanism. When the line appears
general overload, when the overload current is reached, the
bimetallic sheet has a larger bending angle and a lever in the
release mechanism, which is enough to push off the release
mechanism, and from the small circuit breaker, it plays the role of
super load protection. The size of the bimetallic strip is
different from that of the small circuit breaker.
Company profile
Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport