220V Belt Counter Surge Protector Box Three Phase Power Supply CE Approval

Three phase power supply lightning protection box, 220V belt counter, elevator villa, power supply protection

Product introduction

The lightning protection box for single phase power supply is designed according to the standard of IEC and GB. It is equipped with power supply instructions, lightning protection instructions, deterioration alarm and instructions, lightning counter and lightning fuse wire. It is mainly installed in the distribution room, distribution cabinet, AC distribution screen, switch box and other important equipment, easy to be struck by lightning equipment, in order to protect and set up. It is protected against damage caused by lightning overvoltage along the power line.

Product specification

Product features

1. application new clamping technique

2. use special impact melt sheet

3. lightning protection failure indication

Working principle of product

In the normal working condition, the lightning protection module is in the disconnected state and does not affect the normal work. When the line has the impulse overvoltage at the moment when the lightning strikes, the lightning arrester module quickly passes through the very short time, short the overvoltage to the earth, and when the pulse overvoltage disappears, the lightning arrester module is resumed to disconnect. State, which does not affect the power supply of the user.

Use of attention

1. protector is applied to the lightning protection of the main power distribution system C level, and is installed on the incoming end of the main distribution cabinet, the distribution cabinet or the terminal electric cabinet in parallel.

2. all wiring must be firmly and reliably connected

3. ground wire is less than 1 meters

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.