Outdoor Stainless Steel / Solid Copper Ground Rod , Home Electrical Grounding Rod

household outdoor copper lightning arrester, stainless steel lightning rod, grounding bar.

Brief introduction

the lightning rod is the lightning protection measures adopted by Zhejiang tohr Electric Co., Ltd. to independently develop and produce lightning strike hazards. The main material is 304 stainless steel. It is resistant to rust and beautiful appearance. The needle tip is made of special metal. It has strong resistance to flash and solubility, safety and reliability of mechanical connection, beautiful design of flange, convenient and quick installation.

Product specification

Working principle of product

when the thunder discharge close to the ground when it makes the ground electric field distortion. At the top of the lightning rod, the space of the local electric field is formed to influence the direction of the development of the lightning pilot discharge, guiding the lightning to discharge to the lightning rod, and introducing the lightning current through the grounding wire and grounding device to the earth, so that the protected object will not be struck by lightning.

Product features

1. beautiful and decorative

2. under the same condition (height), the protection range is larger than the ordinary lightning rod.

3. safe and reliable: no radioactive elements, stainless steel, corrosion resistance and strong wind resistance.

Use of attention

1. the distance between the independent lightning rod and the protected object should be no less than 5m, so as to avoid the counterattack when lightning strikes the lightning rod. The independent lightning rod shall be equipped with an independent grounding device, and the distance between the grounding conductor and the grounding wire shall not be less than 3m.

2. No lightning rod should be installed on the portal frame of the pressure device.

3. it is strictly prohibited to install overhead lighting lines, telephone lines, broadcasting lines, antennas, etc. on lightning rods or frames.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.