Outdoor Lighting Street Lamp LED Surge Protection Device 10KV Waterproof

LED outdoor lighting street lamp, 10KV, lightning protection, waterproof, parallel surge arrester

Product introduction

LED lamp surge protector is the product of the LED power supply system designed by Torr Electric Co., Ltd., which is applied to the power system of the power supply system, using the GDT discharge tube and the varistor compound symmetrical full protection technology, to protect the LED lighting system from the damage of lightning surge and overvoltage.
The product can be installed in the lampshade of LED lamp or in the control cabinet. It is applied to many outdoor lighting systems such as LED street lamp, tunnel lamp, outdoor landscape lamp and so on.

Working principle of product

When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Product features

1. band failure protection, temperature protection, optional remote communication mode, with LED working instructions.

2. fast response speed

3. with the power status indication, indicating the working state of surge protector.

Product specification

1.Rated Operating Voitage(UC):275V

2. Voltage protective level(UP):0.8KV

3. Max discharge current(IMAX):6KA

4. Nominal discharge current(IN):3KA

Notice of product

1. lightning protector must be disconnected when installing and maintaining, and no live operation is strictly prohibited to prevent electric shock.

2. grounding lines should be short, thick and straight, so as to reduce the influence of distributed inductors on the ability of lightning electromagnetic pulse.

3. after correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.