RJ45 surge protector SPD surge arrester 2 in 1 lightning protection

Brand Name:THOR
Certification:ECM CE
Model Number:TRSS-RJ45/4/Rail type
Minimum Order Quantity:1
Delivery Time:3-7 work days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Active Member
Location: Wenzhou Zhejiang China
Address: China Zhejiang Wenzhou Economic Development Zone
Supplier`s last login times: within 36 hours
Product Details Company Profile
Product Details

Home 100M adaptive Ethernet power network combo lightning arrester POE surveillance camera lightning protector


Model:Trss-rj11 / 45


colour: white


Authentication: CE ECM



Working principle of product


The network arrester can be used not only to protect the high voltage of the atmosphere, but also to protect the operation of high voltage. If there is a thunderstorm, a high voltage will appear and the electric equipment may be dangerous. At this point, the arrester will play a role to protect the power equipment from damage. The most important function of the arrester is to limit the overvoltage to protect the electrical equipment. Lightning arrester is a device to make the lightning current flow into the earth, so that the electrical equipment does not generate high voltage.



Product features


1. The transmission distance can be transmitted by 100m!


2. Self protection voltage exceeds self protection, automatic disconnection and recovery.


3. The metal shielding layer prevents electromagnetic interference and makes the signal more stable.


4. The shell is strong and durable with aluminum alloy, protecting your computer.


5. It can be widely applied to railway communication system, mobile base station, differential station, hard disk recorder, video surveillance equipment, optical terminal machine and other network transmission devices.



Product specification


Model and specofocation TRSS-RJ45/4TRSS-RJ45/8
Rated Operating VoltageUn5V/12V
Max continuous operating voltageUc6V/15V
Voltage protective levelUp(V)〈40/60
Max discharge currentImax(8/20μS)5kA
Nominal discharge currentIn(8/20μS)3kA
Response timens≤1
Adaptive date transfer rate 100Mbps
Insertion loss ≤0.3dB
Configuration dimension 104×25×25
Protective circuit 1.2.3.61.2.3.4.5.6.7.8
Operating condition Temp:-40℃~+70℃
 RH≤95%(25℃)
 Sea level elevation≤3km
Remarks Other max continuous operating voltage can be customized

Product Details


TRSS-RJ45/8 type network lightning arrester is designed and manufactured according to the standard of IEC and GB, and meets the requirements of IEEE802.3AT. It is suitable for the power supply of the communication equipment such as the server of the POE network wire, the wireless AP, the network camera, the network switch and so on. The integrated integrated design and easy installation are convenient.



Use of attention


1. Lightning protection device IN as input and OUT as output, the input end is connected with the outside, and the output end of the input end of the connecting device is protected.


2. The PE line of the lightning protector must be connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.


3. The lightning protector should be regularly tested during its operation. If there is any fault, it should be maintained or replaced in time to ensure the safety of the equipment.


Company profile


Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

China RJ45 surge protector SPD surge arrester 2 in 1 lightning protection supplier

RJ45 surge protector SPD surge arrester 2 in 1 lightning protection

Inquiry Cart 0