Electrical Surge Protective Device Type 3 Lightning Arrester For Household Circuit

Electrical surge protector 1p lightning arrester for household circuit arrester

Product introduction

The power supply surge protector is also called the power supply lightning protection device. It is suitable for the power supply system with the rated voltage of 220V/380V, which is used to protect the indirect lightning and direct lightning and other instantaneous overvoltage in the power supply system of 50/60HZ.
It is suitable for household housing, the third industry and the demand for the electric surge protection in industry. It has relative, relative, relative middle line, middle line to ground and its combination protection mode.

Product features

1. strict product structure, meticulous and comprehensive protection

2. module is designed and installed conveniently and can be replaced directly.

3. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

Product specification

Notice of product

1. marking the extra voltage drop caused by device terminals.

2. generally speaking, the conductor will be separated from the wire which is not protected, and it should be separated from the ground wire. At the same time, in order to avoid transient orthogonal coupling between power cables and communication cables, necessary measurements should be made.

3. the protected equipment must have good grounding, and the grounding impedance value is according to the relevant standard.

Working principle of product

Under normal working condition, the lightning protection module is in a high resistance state. When the power line has lightning invasion or operation transient overvoltage, the lightning protection module will immediately pass through the response speed of nanosecond level, and limit the lightning overvoltage or transient overvoltage to the voltage range allowed by the electrical equipment, thus protecting the normal operation of the electronic equipment.
And when the lightning overvoltage or transient overvoltage is over, the lightning protection module quickly returns to the high impedance state, and does not affect the normal power supply of the grid.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.