International Standard Surge Protection Unit , Industrial Surge Protection Devices

International Standard CE Certified type 2 Surge Protective device

Working principle of product

The function of surge protector is to limit the transient overvoltage to the power line, the signal transmission line in the voltage range that the equipment or system can bear, or to inflow the powerful lightning discharge into the ground, and protect the protected equipment or system from damage by the impact.

Product features

1. module is designed and installed conveniently and can be replaced directly.

2. fastening slideway buckle design is very difficult to fall off

3. tunnel type terminal connection, tighter wiring is more compact.

4. high-performance chips can react quickly when problems arise.

Model and specofocation

Notice of product

1. lightning protector's input port (IN) is connected to the signal channel, and the output terminal (OUT) is connected with the input end of the protected device, so it can't connect with the signal.

2. in order to avoid unnecessary induction loops, we should mark the PE conductor of each device.

3. standard RJ45 interface can be conveniently connected to the front end of the protected equipment. The grounding path should be as short as possible, and the length should not exceed 1.5 meters.

4. lightning protector's input port (IN) is connected to the signal channel, and the output terminal (OUT) is connected with the input end of the protected device, so it can't connect with the signal.

Brief introduction

Surge surge arrester is a lightning protection measure adopted by Zhejiang tol Electric Co., Ltd. to independently develop and produce circuit protector. It is widely used in family housing, the third industry and the industrial field to avoid overvoltage damage such as induction lightning and electrostatic discharge introduced by the system. It has the characteristics of low residual pressure, sensitive reaction, stable performance, reliable work and so on.

Product specification

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.