Indoor Bare Fiber 1KM 2KM 5KM 10KM G657A1 G657A2 invisible fiber bare optical cable fiber cabl lc
Brand Name:HICORPWELL
Certification:IEC 60794-2-10/11
Model Number:G657A2 invisible fiber
Minimum Order Quantity:100M per reel
Payment Terms:Western Union, L/C, T/T
Place of Origin:China
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
Rm 604 Bldg 9th Yinxingyuan South Rd Nanshan District 518054 Shenzhen China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
G652D and G657A2 specifications refer to the glass and cable
construction of optical fibre and are generally the fibres of
choice in optical fibre patch leads for singlemode systems.
G657A2 fibres are fully compatible with G652D fibres.
ITU-T G652D singlemode fibres have been used in all networks for
more than 30 years. Being backwards compatible, this makes for
easier maintenance/repair (splicing fibres of the same type).
The G652D fibre Mode Field Diameter is 10.4µm @1550nm. G652D fibres
provide marginally lower loss transmission, which is better in
facilitating long distance communication links (up to and greater
than 100km). However, G652D fibres have limited bend resistance.
G657A2 fibres are used in advanced access cable network installation, where higher bend resistance is required for smaller cable jointing pits and also allows for cable and hardware miniaturisation.
G657A2 fibres are used in advanced access cable network installation, where higher bend resistance is required for smaller cable jointing pits and also allows for cable and hardware miniaturisation.
G657A2 fibres are fully compatible with G652D fibres.
The G657A2 fibre Mode Field Diameter is 9.8µm@1550nm. Splice losses
are slightly higher when splicing the two different fibres
together.
G657A2 fibre has greater resistance to bending (macrobend) losses (see figure below), and facilitating low-cost deployment techniques.
G657A2 fibre has greater resistance to bending (macrobend) losses (see figure below), and facilitating low-cost deployment techniques.
G675A2 bending insensitive single-mode fibre encompasses all the features and provides good resistance to maro-bending.
It has low macro-bending sensitivity and low water-peak level.
It is comprehensively optimized for use in O-E-S-C-L band (1260
-1625 nm).
It offers good resistance to additional losses due to low
macro-bending in the 1625 nm wavelength region.
This not only supports L-band applications but also allows for easy
installation without excessive care when storing the fibre.
Indoor Bare Fiber 1KM 2KM 5KM 10KM G657A1 G657A2 invisible fiber bare optical cable fiber cabl lc
Inquiry Cart
0