

Add to Cart
ADC Krone Disconnection Module 7004 2 001-01krone LSA-PLUS with Screw Terminals
Disconnection Module 2/10 to Screw terminal has 20 position screw terminals soldered to a PCB. Each IDC contact of the
module is connected to the relevant contact of 20 position screw terminal through PCB, thus permitting wires up to 2.5 Sq.
Mm to be connected to the module.
The assemblies can be supplied as single unit with 20 position terminals on one side or as double units with 20 position
terminals connected to both row of IDC contacts
Features:
Can be used as drop wire module in military field installation / rural
Flexible indoor and outdoor use
Robust long term environmental stability
Attribute | Value |
Connector Type | Telephone/Telecom |
Number of Ways | 20 |
Mounting Type | Back Mount Frame |
Termination Method | IDC |
Contact Plating | Silver or Gold |
Contact Material | Phosphor Bronze |
Housing Material | ABS or PBT |
Wire Size | 26-20 or 28-20 AWG |
Colour | White |
Maximum Operating | +80°C |
Minimum Operating | -20°C |
Series | LSA-PLUS |
Technical Specifications
Thread dimensions: | Rigid thread a): Ø 0.4-0.8 mm b) |
Isolation: Ø 0.7-1.5 mm, PVC and PE | |
No. of threads per | 2 max. (with identical dimensions) c) |
Insulation resistance: | ≥ 5 ´ 104 MΩ |
Test voltage: | ≥ 2kV |
Surge voltages: | As VDE 0433 |
Contact resistance: | Typical 1 mΩ |
Constant current: | Determined by the thread max. |
allowed current | |
Surge current: | Disconnections modules: 5As 5kA 8//20 μs |
Contact stud bars: 10As 10kA 8//20 μs |