Add to Cart
Packaging & Delivery of pipe making machine, ERW pipe making
machine, pipe mill, tube mill, China pipe making machine
manufacturer
goodbusiness16ATgmail.com
1. Design and Manufacture of pipe making machine, ERW pipe making
machine, pipe mill, tube mill, China pipe making machine
manufacturer
2. Pipe Wall Thickness 0.7 - 25.4 mm
The production line of Spiral Welded Pipe Mill is flow process from starting production to finish gathering and storing. The ultrasonic flaw detection, X Ray inspection and hydraulic test can all be carried out continuously. It can be used to produce the spiral welded pipes with its quality in conformity with API standard.
Packaging Detail: | Usually in 20' container or depend on your demand |
Delivery Detail: | Within 90days |
1.Spirally Mild Steel Mill
2.high-quality
3.small power consumption
4.longer life expectancy
5.high yield
Technical Specifications of pipe making machine, ERW pipe making
machine, pipe mill, tube mill, China pipe making machine
manufacturer:
Φ245-Φ1020 Spirally Welded Stainless Steel Tube Mill.The production
line is flow process from start to finish.The ultrasonic flaw
detection,X Ray inspection and hydraulic test can all be carried
out continuously.It can be used to produce the spirally welded
pipes with its quality in conformity with API standard.
outer diameter: | Φ219-Φ820mm Φ426-Φ1420mm |
wall thickness: | 5-12.7mm 6-16mm |
Length: | 8-12.5mm 8-12.5mm |
Raw Material hot rolled coils: | |
inner diameter Φ508-Φ760mm Φ508-Φ760mm | |
outer diameter: | 1200-Φ2000mm Φ1200-Φ2000mm |
width(before shearing): | 550-1550mm 600-1550mm |
thickness: 5-16mm 6-16mm | |
coil weight(max): | 25t 30t |
The quality of the material: API-5LS X60-X65 | |
yielding limit: | 457N/mm² 457N/mm² |
strength limit: | 562N/mm² 562N/mm² |
Welding methods: | |
butt welding single wire submerged-arc welding | |
inner welding single wire submerged-arc welding | |
outer welding single or double wire submerged-welding | |
line speed: 0.6-3.6m/min | |
Feeding and drawing force: 60t 120t | |
pressure of hydraulic press: 7.5-21Mpa |
Product quality:
Pipe product of this unit meet with required standard.
Process flow:
Uncoiling→pinching& leveling→electric vertical roll→cutting&
butt welding→electric vertical roll→rotary shear→vertical
roll→delivery m/c→guide board→forming unit→inside welding→outside
welding→flying cutting→pulling out
process flow mentioned above is general arrangement of host
machine, which can be revised , such as to add pipe beveling
machine, pipe hydrotester, as well as NDT testing equipment to meet
with relative international standard.
Annual output:
to be designed as per user's requirement
After-sale service:
1 year's guarantee is available, offer technical guidance of
installation& commissioning at home& abroad.
Below is general layout of host machine and reference photos of
spiral pipe machine, including preparation area, pre-bnd
guiding& forming unit, as well as beveling and hydrostatic
testing equipment. Machinery in finishing area, such as pipe
beveling machine, hydrostatic testing machine is opptional.