Automatic Discharge Peeler Centrifuge Machine Continuous Feed 1250 Mm

Continuous Feed And Automatic Discharge Peeler Centrifuge Machine

Product Description

GK1250-NB Peeler Centrifuge is a automatic batch operation machine which is horizontal type and has wide scraper for discharging. Users can do cyclic operation on this machine automatically or by manual, each cycle is including feeding, separating, material washing, discharging and screen washing. Each process is done under full speed.

This machine adopts an electric hydraulic joint control system, with independent electrical control system and hydraulic system. During automatic operation, the operating time of each process of the machine is controlled by the electrical control system and can be adjusted within a certain time range.

Due to the high separation factor of the machine, the separation effect is good, and it can also effectively wash the solid phase. The solid phase humidity obtained through separation is low. Under the conditions of reasonable selection and use of filter media, the machine has high production capacity. However, due to the high-speed scraper discharge, it has a certain degree of fragmentation of solid particles.

Working principle of GKH

The horizontal siphon scraper centrifuge not only has the driving force of a regular scraper to unload the centrifuge, but also has a siphon suction force similar to a vacuum tube. When the centrifuge is empty, the conversion pipe injects waves into the siphon chamber, and the liquid passes through the siphon chamber

The through-hole of the drum is pressed outward into the gap between the drum, while expelling the air from the siphon and forming a wave body on the filtering medium to evenly distribute the feed. Then start feeding and rotate the siphon to a certain position. After a certain period of time, rotate it to the required lower position. After feeding, turn the siphon to the lowest position

The maximum diameter position of the suction chamber). After the suspension enters the drum, solid particles are trapped on the filter cloth, while the wave body passes through the filter cloth and the inner drum of the filter, gathers in the gap between the inner and outer drums, enters the siphon chamber through the through-hole of the drum and suction chamber, and is then removed by the siphon pipe. After the deposited solid continues to dry, ZiI pushes the scraper to rotate and start scraping. After sliding out of the machine through the hopper, the discharge is completed and the screen is washed. The siphon scraper centrifuge not only flushes the filter cloth in the drum, but also adds flushing water to the cutting and suction chamber through the flushing pipe. Control the upward and downward rotation of the siphon pipe, so that the liquid flows from the inner drum to the pulsating backwash filter screen. The flushing time and frequency can be determined based on the material characteristics. After the screen cleaning is completed, it automatically enters the next cycle of work.

Successfully Application

General requirements for the application range of horizontal scraper discharge centrifuges: separation of solid-liquid two-phase systems with particle size ranging from 10 to 500um, solid phase concentration ranging from 20 to 80% (weight concentration), and liquid phase viscosity less than 10-2Pa. s. In addition, it can also meet the requirements of washing the solid phase. This machine is now widely used in industries such as chemical, light industry, food, pharmaceutical, etc. The separated materials include ammonium sulfate, sodium sulfate, sodium chloride, boric acid, starch, pesticides, synthetic resins, potassium chloride, light sodium carbonate, polyvinyl alcohol, polyoxymethylene, polyethylene, sodium sulfate, caustic soda, salt, fertilizer, aluminum sail, synthetic rubber, and so on.

Technical Paramaters

Our service

1 . Technicians are available for overseas service.

2 . 12 months guarantee period from machine arriving date.

3 . The operator could get trained by our experienced technician.

4 . We always keep certain inventory level of spare parts, which means the replacement can be sent to you timely

Juneng Machinery Group is a global group company specializing in the manufacturing of filters, centrifuges, and pressure vessels. It consists of Juneng Machinery (China) Co., Ltd., and Wuxi Hexiang Equipment Biochemical Co., Ltd. We have large production bases in Hong Kong, Nanjing, Wuxi, and Yixing. Mainly engaged in research, development, manufacturing, and sales of filtration equipment, separation equipment, and pressure vessels, it has become a leader in the domestic filtration separation and pressure vessel industry and an important global supplier

The company is proud to be the leader in such industry with 80% domestic market share in Oils & Fats industry,Chemical industry, Pharmaceutical industry, Beverage industry, Petrol-chemical industry, and now is one of the well-known producers and suppliers in the world. Our products are also exported to clients in such countries and regions as USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and so on.

We actively participate in various domestic and foreign exhibitions such as ACHEMA and Canton fair

In recent years, our company has introduced a series of advanced equipment including Filter, Separator, Decanter centrifuge and pump. In addition, we have obtained CE certificates, ASME U certificate and ISO 9001 certificate etc.

ASME U Certificate

The company now areas 280,000 square meters in Nangjing City and Yixing City of Jiangsu Province.We have more than 1100 people employees and equipped with over 1500 units of advanced production equipment and test instrumentation.

Office

Website:

https://chinajuneng.en.alibaba.com

Contact : Wechat