SS304 Horizontal Decanter Centrifuge For Paper Mill Sewage Treatment

Types Of Decanters
There are several types of decanter centrifuges currently utilized in the industry, the most widely recognized are vertical, horizontal and conveyor centrifuges. The principle behind a decanter centrifuge is based on the theory of gravitational separation. For example, if you fill a vessel with a mixture of mud and water, over time the weight of the mud will cause it to settle down at the base of the vessel. With the mud congealed at the bottom, the water will be forced upwards, creating a clear separation between the two.

Description

In a sewage plant, what is the process of using a spiral settling centrifuge for desliming?

In sewage treatment plant, in the treatment of activated sludge, the whole process of using spiral settling centrifuge is: through the high-speed rotating drum, to drive the high-speed rotation of sludge, and then generate centrifugal force, so that the solid particles in the sludge settlement is accelerated, and concentrated on the drum wall. Then, through the spiral, the mud cake is scraped to the small end of the drum, so that it can be discharged, thus completing the mud removal work.

What is the advantage of decanter centrifuge to treat the waste water?

The horizontal screw discharging and settling centrifuge (referred to as horizontal screw centrifuge) with a fully closed and continuous operation with a large length-diameter ratio is used as the main machine of the sewage treatment centrifuge, which has the following advantages:

1. Fully closed operation, clean and pollution-free site.

2. The amount of flocculant and cleaning water is small, and the daily operation cost is low.

3. The equipment layout is compact, covers a small area, can significantly reduce the land acquisition and infrastructure investment.

Other Applications :

The 3-phase decanter separates which contains oil into an oil phase, solids and virtually oilfree waste water. Because of its high dry matter, the solids can be recycled relatively easily.

In addition, the solids concentration in the waste water is lower than would be the case if nozzle separators are used in conventional process.

Advantages :

1. Lower cake transportation costs due to very dry solids

2. Better recovery of nutrients due to very high separation efficiency

3. Lower fresh water consumption compared to other processes

4. Continuous and fully automatic operation

5. 24 h operating reliability

6. Optimum wear protection

7. Energy saving design

8. Easy to operate

9. Easy to maintain

10. Simple assembly/dismantling

Features :

• All parts coming into contact with the product are made of stainless steel.
• 3-phase AC motor for controlled torque starting via frequency converter
• Approximately 80 to 90 % of the oil is recovered.
• Low personnel costs due to continuous and automatic operation.
• Highest g-force for higher solids output
• Adjustable bowl speed via VFD
• Automatic adjustment of differential speed via VFD
• Two motor drive
• Belts for both primary motor and secondary motor

Technological Data :

*** F: Ex-proof, W:Waste water, S: Three phase FS:Ex-- proof and three phase

FAQ :

Q:The paper mill sewage is treated with a horizontal screw centrifuge. It is found that there is a little bit more slag and blockage. How to deal with it?

A:How to judge that the horizontal spiral centrifuge has a little more slag? Is it compared with the same technical parameters before? Or did you change another decanter centrifuge or add too much medicine? Increasing the precision of machine parameters or the dosage of reagents both can bring about more slag discharging. In short, the smaller suspended solids that were previously hidden in the sewage are also separated by centrifugation. If the pretreatment is not done well, it can also increase the solid content of the fluid.

We have 2 solutions to solve the condition of more slag. One is to do a good job of pretreatment to reduce the solid content of the fluid, and the other is to adjust the differential speed of the spiral sweeping paddle of the horizontal screw centrifuge to make the pushing more smooth. We use the juneng horizontal spiral centrifuge, which is very stable in performance. After more than two years of use, there is no sudden change in performance.

Juneng Machinery Group is a global group company specializing in the manufacturing of filters, centrifuges, and pressure vessels. It consists of Juneng Machinery (China) Co., Ltd., and Wuxi Hexiang Equipment Biochemical Co., Ltd. We have large production bases in Hong Kong, Nanjing, Wuxi, and Yixing. Mainly engaged in research, development, manufacturing, and sales of filtration equipment, separation equipment, and pressure vessels, it has become a leader in the domestic filtration separation and pressure vessel industry and an important global supplier

The company is proud to be the leader in such industry with 80% domestic market share in Oils & Fats industry,Chemical industry, Pharmaceutical industry, Beverage industry, Petrol-chemical industry, and now is one of the well-known producers and suppliers in the world. Our products are also exported to clients in such countries and regions as USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and so on.

We actively participate in various domestic and foreign exhibitions such as ACHEMA and Canton fair

In recent years, our company has introduced a series of advanced equipment including Filter, Separator, Decanter centrifuge and pump. In addition, we have obtained CE certificates, ASME U certificate and ISO 9001 certificate etc.

ASME U Certificate

The company now areas 280,000 square meters in Nangjing City and Yixing City of Jiangsu Province.We have more than 1100 people employees and equipped with over 1500 units of advanced production equipment and test instrumentation.

Office

Website:

https://chinajuneng.en.alibaba.com

Contact : Wechat