Add to Cart
25 Meters Rock Blasting Drilling Rig Kaishan KG320 for Mining
Quarry DTH drilling
Application
KG320 down the hole drill rig for open use is an improved device in
compliance with national regulations on environmental protection.
Equipped with the Yuchai engine (China 3), the drill rig meets
national standards for emissions and environmental. The ramming
motor of plunger piston and four-wheel drive improve the working
pressure and climbing capacity. The expanded pith and lifting-arm
hydraulic cylinder enable it to meet the requirements of limiting
position use. Meanwhile, the hydraulic system is improved, thereby
proving increased system flow and rotary. The hydraulic cylinder
has been optimized, thus making it more reliable. The guide rail is
installed in an inclined way, making operations and observations
easier. The thickened profile is used for the housing; and the
additional ring makes handling and lifting convenient.
Characteristics
1. Reliable hydraulic system
The oil cooling device is avaliable in our KG320 low pressure
eco-friendly crawler drilling rig , thus hydraulic oil thermal
influnce
to the whole system, can be greatly eliminated,premium hydraulic
are use for better stability and reliablity.
2 Powerful engine
A double cylinder diesel engine is used for this crawler drill , its tractive force and gradeability are both quite amazing.
3. Reliable hydraulic pump group
Two separated gear pumps are adopted for the oil supply,Thier reliability and adaptability are both great and maintainace are also very convenient.
4 Flexiable drilling arm
KG320 low pressure eco-friendly crawler drilling rig comes with
flexiblemobile drilling arm which can adjusted by oil cylinder to
get proper drilling angle an accurate height of horizontal hole,The
expanded operation area has great enhance drilling machine's
adapability.
Specifiction
Model | KG320 horizontal and vertical hole digging machine |
Weight | 4400kg |
Dimension | 5750*2100*2650mm |
Drilling hardness | f=8-12 |
Drilling diameter | 80-105mm |
Depth of economical drilling | 25m |
Rotary Speed | 0-140rpm |
Rotary torque | 1250N.m |
Lifting force | 20KN |
Method of feed | Oil cylinder-leaf chain |
Feed stroke | 3820mm |
Travelling speed | 0-2.2km/h |
Climbling capacity | less than 30° |
Ground clearance | 465mm |
Tilt angle of beam | down 135°, up:50°, total:190° |
Swing angle of beam | left;100°, right: 45°, total:145° |
Swing angle of drill boom | Left:44° , right:45°, total 89° |
Pitch angle of drill boom | Down:50°, Up:25°, Total:75° |
Compensation length of beam | 900mm |
Diesel engine | Yuchai 4DKC4G2-80(58kw/2200rpm) |
Drill rod | 64*3m/pc or 73*3m/pc |
Air consumption | 7-15m3/min |
Max.height of horizontal hole | 2750mm |
Min.height of hotizontal hole | 350mm |
Packing& Delivery
Our Service