Premium Grade Hot Melt Adhesive PSA for lady sanitary napkin

The JaourMelt® 3810U is a synthetic rubber based hot melt adhesive specifically developed for femcare positioning application of nonwoven disposable products, premium grade. The product is florescent free with water white in color, low odor, and with very good heat resistance. It provides smooth peel strength, excellent transfer resistance and ageing performance.

SUGGESTED USES

Premium grade of Positoning adhesive for femcare nonwoven disposable products.

TYPICAL PROPERTIES

OPERATING GUIDES

The material can be applied by all types of slot applicators. Suggested operation temperature is 130 – 150°C,depending on machines, substrates, and plant conditions.

FDA STATUS

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

PACKAGE

1kg block wrapped with meltable film, 20kg/box, or with siliconized release paper, 20kg/box.Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 100°C.Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS

Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

HAZARDS INDENTIFICATION

The product is not considered as hazardous within the meaning of the valid (EU) preparation directive.

Skin Contact :Molten product adheres to the skin may cause burns
Eye Contact:Direct contact may cause eye irritation.
Inhalation : Negligible hazard at ambient temperature. Vapors and/or aerosols which may be formed at elevated temperature may be irritating to eyes and respiratory tract.
Ingestion : No evidence of harmful effects from available information.

FIRST-AIDS MEASURES

Skin Contact :Molten product. Immediately cool down the affected area by flushing with cold water to dissipate heat. Seek medical attention.
Eye Contact :If hot, immediately cool down the affected area by flushing with cold water to dissipate heat. Get medical attention promptly.
Inhalation : Move to fresh area. Get medical attention if irritation persists.
Ingestion : No harmful effect expected.

FIRE FIGHTING MEASURES

Extinguishing media : Water spray, foam, dry chemicals, and carbon dioxide.
Unsuitable Extinguishing media : Water in a jet may disperse fire. Special protection equipments for firefighters :
Use adequate personal protective equipments and self contained breathing apparatus.

Unusual fire and explosion hazards :
Not classified as flammable but will burn. Hazardous combustion products may
include carbon monoxide, carbon dioxide.

Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing membranes, including the research & development, manufacturing, sales and after-sales services.

The company ’s core value is to deliver high performance and the right products, and full services to meet customer performance requirements. That includes tailored products for customers with rapid response. Our wide product range provides you with versatile choices of adhesive performance in demanding environments.

The corporate business philosophy of “Value-creation, high efficiency and constant enterprise.” supports the company to keep on moving forward actively. Our business team is prepared and ready to serve you, and you can rely on JAOUR to be your consistent and long-term partner in adhesive technology.