8BBL 2 Vessel Brewhouse Turn Key Beer Brewing Equipment Tri - Clamp Connection

8BBL Turn-key Beer Brewing Equipment 2 Vessels Brewhouse System From China

Product Description

Our brewhouse is on the basis of absorbing European advanced and experienced beer machinary technology, it can fulfill various brewing technologies, variable tastes or specific capacities.

10BBL/20BBL/30BBL/40BBL/50BBL brewhouse is standard, larger or unique brewhouse also can be customized by client`s needs. the system is composed of Mash Tun/Lauter Tun/ Brew kettle/Whirlpool Tank etc. it can be headed by steam or electricity or gas fire.

The main tanks can be combined to 2 vessels/3 vessels / 4 vessels brewhouse to meet different requirements of brewing technology.

1. Mash tun:
Equipped with suitable jacket and mixer to ensure temperature rise rate, avoid coking
large volume, as well as wort boiling, improve the overall system’s efficiency.

2. Lauter tun:
Combined plow knife structure increase lautering efficiency,increasing the diameter of the center circular construction has improved lautering efficiency and spend grains discharge speed greatly. Because of the center circular construction basic design, the mash will be filled into the lauter tun steadily and speedily, the wort will be circulated with low oxygen uptake.Set more suitable wort outlets accord with hydrodynamics principle, assure wort flows through piping etc. long wort collection ring, make wort collection steadily and speedily.
Use specially designed raking arm to raise main shaft seal, avoid leaking to improve sanitation.Can be used as mash tun, meet a variety of process demands of craft beer.

3. Kettle tun
With inner heater, jacket, mixer. This design makes the kettle tun can be used as adjunct cooker or mash tun, meet the special demands of craft beer process; benefit for heating low-temperature wort more.Inner heater functions to wort forced circulation

4. Whirlpool tun
Specially designed whirlpool tun bottom accord with hot trub sedimentation characteristics, combined with specially designed hot trub collection zone, can make the hot trub more closely and be discharged directly no need for washing, avoid remixing hot trub into wort when we pump the wort to PHE.

Technology Configuration

Material:SUS316L or SUS304
Interior Shell: 2B/mirror plate; TH=3mm
Exterior Shell:2B/mirror/brushed plate; TH=2mm
Heating method:steam;electricity or direct fire
Dimple jacket or dribbling for heat exchanger, rock wool insulation,TH=80-100mm
stirring methods:upper stirring or bottom stirring
Lauter plate:milling
Grain removal:side discharging or bottom discharging
Tank equips with manhole, light sight glass, washing tube, temperature sensor achieve temperature control, 360 degree sanitory washing ball,material inlet and outlet etc;
Exhaust system:indoor or outdoor exhaust pipe and fan;
Plate heat exchanger: Cooling form,capacity and piping meet requirements
Oxygenation system:oxygenation form, capacity and interface form meet requirement
Working platform:stainless steel
Heating system: design capacity meet the requirement
Cooling system: design capacity meet the requirement
Accessories:cold water pump, hot water pump,, filter pump, whirlpool pump, wort pump, mixer,material &water mixer, wort tester, hop adding device,hop filter device, saccharimeter,worst rake,spent grain recovery and transfer device, CIP system etc
Mash line:Including all the pipeline,valves and thermal insulation material

HUBEI YIDELI LIGHT INDUSTRY TECHNOLOGY CO., LTD. (shortened as YDL INDUSTRY ) is a professional manufacturer of manufacturer and supplier in brewery, chemical & pharmaceutical, food & beverage equipment industry, certified by ISO, CE, TUV, CSA etc. YDL INDUSTRY has over 10 years experiences in design, manufacture, installation and commissioning and try to be the client’s best partner for planning, design, fabrication, management and successful execution for each unique project, satisfy clients with excellent quality and considerate service.

Our main brewery equipment includes as followings:

• Malt Crushing System: Malt mill, Auger
• Mash System: 2/3/4 Vessel Brewhouse
• Fermentation System: Fermenter
• Storage&Maturation System: Brite Tank
• Water System: Hot Liquor Tank, Cold Liquor Tank, Pump
• Cooling System: Glycol Chiller, Heat Exchanger
• Cleaning System: Portable CIP/Integrated CIP
• Filling&Washing System: Keg Filling machine/Keg Washing Machine
• Others: Kegs, Filtration System etc.

We devote all our energy to meet your needs on any budget or production target. Our equipment is combined with good quality, beautiful appearance and durable using.

• We only use quality SS304/SS304L/SS316/SS316L and fine red copper
• Welders who have been welding for more than ten years only
• Key components only use internationally renowned brands
• Such as SIEMENS, ABB, Alfa Laval, we are using the best control instrument
• No matter which part of the weld is welded, we shall protect it with argon of 9999.9% purity

Today’s crafting beer is a blend of both art and process and we love the artistry that today’s brewers are creating. However, we also believe that the application of science, engineering, technology, and automation can give brewers better tools to create even better works of art more efficiently, more economically, more consistently and with greater respect for our environment through unmatched sustainability.

YDL INDUSTRY is dedicated to being the best manufacturer and supplier of brewery equipment, technology, and services to the craft brewing market. Our mission is helping craft breweries “CRAFTING BETTER BEER LIKE GENIUS”