CS-720 Liquid Gardner Haze Meter, Pt-Co / APHA / Hazen Color and
Transmittance Testing Transmittance Hazemeter
Color and Transmittance Hazemeter Specifications
| Type | Color and Haze Meter CS-720 |
| Light Source | CIE-A,CIE-C,CIE-D65 Chromaticity Value:
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CMF, U30,DLF,NBF,TL83,TL84 |
| Standards | ASTM D1003/D1044,ISO13468/ISO14782 CIE No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7,
JIS Z8722 Condition c standard |
| Parameters | HAZE,Transmittance(T) CIE No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7,
JIS Z8722 Condition c standard Whiteness Index (ASTM E313-00,ASTM
E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Stensby)
Yellowness Index (ASTM D1925,ASTM E313-00,ASTM E313-73)
Tint(ASTM E313-00), Metamerism Index, Milm
APHA,Pt-Co,Gardner,Color
Difference(ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00) |
| Spectral Response | CIE Luminosity function Y/V(λ) |
| Wavelength | 400-700nm |
| Wavelength Interval | 10nm |
| Geometry | 0/d |
| Measurement Area/Sample Port | 16.5mm/21mm |
| Measurement Range | 0-100% |
| Haze Resolution | 0.01 |
| Haze Repeatability | ≤0.1 |
| Sample Size | Thickness ≤150mm |
| Display | 5 inch TFT LCD screen |
| Memory | 20000 value |
| Interface | USB |
| Power | 110-240V |
| Working Temperature | 10-40 ℃ |
| Size (LxWxH) | 598mm X 247mm X 366mm |
| Standard Accessory | PC software (Color QC) |
Color and Transmittance Hazemeter Introduction
Haze is measured with a wide angle scattering test in which light
is diffused in all directions which results in a loss of contrast.
That percentage of light that when passing through that deviates
from the incident beam by greater than 2.5 degrees on average is
defined as haze.
Digital haze meter also measures total transmittance. Total
transmittance is the measure of the total incident light compared
to the light that is actually transmitted (e.g. total
transmittance). So the incident light may be 100%, but because of
absorption and reflection the total transmittance may only be 94%.
Digital haze meter CS-720 can measure haze, transmittance and color
for transparent plastic, glass, screen, etc with high accuracy and
can conform to both ASTM and ISO standard.
Color and Transmittance Hazemeter Advantage
1. Conform to ASTM and ISO standard.
2. It can realize transmittance compensation measurement which can
provide higher accuracy test result.
3. Three kinds of light sources A,C and D65 for haze measurement.
3. Open measurement area, no limit on sample size.
4. Different fixtures to meet the measurement requirement for
plastic sheet and films.
5. Instrument is with free software for haze and transmittance
measurement.
Color and Transmittance Hazemeter Packing List
| Qty. | Name | Qty. | Name |
| 1 | Main Instrument | 1 | Power Adaptor |
| 1 | Operating Manual | 1 | USB Cable |
| 1 | Haze QC Software | 1 | 0% Calibration Cover |
| 1 | Compensation Port Cover | 1 | Warranty Card |
