Product Details
Three Phase Energy Meter Test Multimeter Test Bench
Product Introduction :
ZXDN-306 three-phase multi-function meter inspection device is our
company's requirements according to relevant national standards and
regulations. Based on the accumulation of more than ten years of
production experience of the three-phase program-controlled
electric energy meter verification device, the electronic
program-controlled three-phase electric energy meter verification
device has been carefully developed. It is based on different types
of calibration devices developed and produced by different
three-phase energy meters; it is suitable for the inspection of
various single-phase three-phase energy meters (including
sinusoidal reactive power meters) of level 0.2 and below.
Craftsmanship, complete functions and excellent performance will
definitely be favored by you.
Main characteristics:
- Adopt split or integrated structure, special aluminum alloy hanging
table frame, fireproof composite board table, beautiful appearance.
- The signal source adopts DDS technology, large-scale CPLD and RAM
embedded system, output 36000 phase modulation, 12-bit D / A
conversion waveform synthesis output, 16-bit D / A amplitude
modulation output; has high stability and small adjustment fineness
, Low distortion, etc.
- The 7-inch color LCD screen with RAM system has the advantages of
large amount of displayed information, intuitive and convenient.
- Each table position is equipped with 6-bit LED multi-function
display, which can display the basic error of each table position,
clock frequency and various test marks;
- The current connection method of the electric energy meter is a
quick crimping aluminum alloy junction box (optional smart meter
crimping junction box).
- Each table position is equipped with a multi-channel pulse input
switching port with protection function (four-channel pulse,
one-channel 485, one-channel multi-function), which can prevent
high voltage from entering by mistake and causing failure; one-time
wiring and automatic switching
- Each meter position is equipped with an open current detection
function, which can automatically detect and indicate the open
meter position. (Optional function of automatic short circuit open
position)
- Each meter is equipped with a fee control detection module, which
can do local and remote fee control tests. The smart meter of the
built-in relay can detect the opening and closing function of the
relay, and the measurable output voltage of the external relay.
- Configure ZXT10 high-precision standard clock, internal 3 * 10-8
crystal oscillator, can test the clock error.
(Optional ZXGT10 GPS clock timer).
- Configure multi-serial communication, each table position is
equipped with an independent 485 communication port (optional
serial server can implement parallel communication).
- Each table position is equipped with a three-dimensional adjustable
multi-function photoelectric sampler, which can reliably receive
the black mark of the mechanical watch and the strobe signal of the
electronic watch (optional).
- Adopt PWM modulation power amplifier, which has large output power,
small calorific value and efficiency up to 90%.
- The device has the soft start and stop function of voltage and
current output, the protection and alarm function of short circuit
of voltage output terminal and open circuit of current output
terminal, all-round protection of output power amplifier, high
reliability;
- Carrier switching box can be configured, built-in 6 domestic
mainstream carrier controller. (Optional)
- Provide hierarchical verification management software, with
power-off protection function, advanced multi-thread programming
technology, to ensure parallel communication of multiple epitopes.
For more information , click this link to send us inquiry now !
Technical indicators :
Our company :
Wuhan GDZX Power Equipment Co.,ltd is the supplier of the State
Grid in China.It means we are the supplier of the Chinese
Government.And our products spread throughout the whole China.
What's more, our customers come from different countries like
America, England, Peru , Malysia, Vietnam ,Singapore and so on.
Our main products are High voltage tester , Cable Fault Locator, Power Quality Analyzer, Standard Power
source , Testing Transformer and so on.
Packaging & Delivery
1. Delivery within 8-15 work days
2. After-sale service:. Any questions or problems after receiving
the product, please feel free to contact us. Problems would be
solved for you immediately.
3. Experienced and professional logistic agent .
Company Profile
Wuhan GDZX Power Equipment Co., Ltd. located at No.1 Fenghuangyuan
Second Road, Jiangxia District City in China. It covers an area of
17,952m2, factory area of 6000m2, a total number of over 108 employees. The production and
technical personnel account for 60% of the total staff. GDZX
devotes itself in designing, manufacturing and marketing electrical
power testing equipment. Our products widely used in power, coal,
oil, chemical, metallurgical, railway, communications and other
industries.
The main products include: AC series resonant device, partial discharge detection system, AC
DC high voltage test equipment, standard power source for
calibration, power transformer & instrument transformer test
equipment, and others.
The company business philosophy is "Integrity to win customers,
service to create a market" We are fully aware of the importance of
trust and quality. There is a professional and qualified
after-sales service team to support our customers. Rest assured
that our rich on site commissioning experiences and technology
ability enable us to answer any questions that customers may have.
Welcome new and old customers from all walks of life to contact us
for future business relationships and mutual success!
Some of our trading records :