Pipe Route Tracing Underground Pipe Locating System For Cable Locator

This device is a high performance underground metallic pipe locating system.It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables,locate the pipe insulation damage and part type cable fault.

FUNCTIONS

l Compass display: to display pipe position directly.

l Real-time depth measure and current measure.

l History curve display: to display the signal variation directly.

l Cable Identification: Clamp (optional) identification and sensor identification.

l Grounding fault location: Use A frame (optional) to pinpoint pipe insulation damaged points against ground.

l Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.

l Multiple locating frequency: active detection and passive detection.

l Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.

l Big capacity Li-on batteries series,support auto power off when low battery or long time no operation

l Solid case and light weight easy to carry

SPECIFICATION

Transmitter:

l Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.

l Output Frequency: 640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.

l Output power: max. 10W, 10 levels adjustable, auto impedance matching.

l Direct connection voltage: max. 150Vpp.

l Overload and short circuit protection.

l HMI: 128X64 LCD.

l Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah.

Receiver:

l Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).

l Receiving frequency:

- Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

- Power frequency: 50Hz/60Hz,250Hz/300Hz

- Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz

l Pipe detection mode: wide peak method,narrow peak method,valley method

l Cable identification mode: Receiving Clamp (optional) intelligent identification / sensor (optional) identification

l HMI: 320X240 LCD

l Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

Other:

l Volume: transmitter 270x220x85mm,receiver 700x270x120mm

l Weight: transmitter 2.2kgs, receiver 2.2kgs

l Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A

l Temperature: -10-40℃,humidity 5-90%,elevation <4500m

Wuhan GDZX Power Equipment Co., Ltd. located at No.1 Fenghuangyuan Second Road, Jiangxia District City in China. It covers an area of 17,952m², factory area of 6000m², a total number of over 108 employees. The production and technical personnel account for 60% of the total staff. GDZX devotes itself in designing, manufacturing and marketing electrical power testing equipment. Our products widely used in power, coal, oil, chemical, metallurgical, railway, communications and other industries.

The main products include: AC series resonant device, partial discharge detection system, AC DC high voltage test equipment, standard power source for calibration, power transformer & instrument transformer test equipment, and others.

The company business philosophy is "Integrity to win customers, service to create a market" We are fully aware of the importance of trust and quality. There is a professional and qualified after-sales service team to support our customers. Rest assured that our rich on site commissioning experiences and technology ability enable us to answer any questions that customers may have.

Welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Some of our trading records :