Add to Cart
Phase Loss 3 Phase Control Relay 2C/O Contacts For 4 Wires Refrigerator
Phase sequence protector is a multi-function three-phase power system or three-phase power equipment monitoring and protection equipment.
The phase sequence protector can display the three-phase power
supply voltage in real time, and can output through the relay when
the power supply overvoltage protection, undervoltage protection,
phase loss protection, unbalance protection, fault phase
protection, PTC temperature protection, load side protection and
other faults occur. The form provides the user with an alarm output
and the contact control signal output by the protection circuit
action, which functions as an alarm and protection. Sets
three-phase voltage display, over-voltage protection, under-voltage
protection, phase loss protection (phase-failure protection),
voltage imbalance protection, phase sequence protection (wrong
phase protection) in one, using a powerful microprocessor chip and
non-easy Loss of storage technology, display using high-definition
ultra-wide temperature Chinese liquid crystal, with full-featured,
stable performance, intuitive display, easy operation.
1 . High-precision : phase sequence protector uses a powerful microprocessor chip,
the traditional technology uses AC sampling technology, voltage
measurement accuracy of ± 1%, the new technology uses true RMS
measurement technology, measurement is more accurate, the error is
less than 1%, at the same time The three-phase power supply phase
voltage values can be displayed separately, which is equivalent
to the functions of three voltage meters. ZHRV wide power
frequency: phase sequence protector can be applied to 45 ~ 65HZ, to
ensure universal use.
2 . Wide power supply voltage : The phase sequence protector can be applied to phase voltages of
150-300V (line voltage 250-500V), which greatly reduces the size of
the phase sequence protector, making it easy for users to choose,
and at the same time reducing the amount of spare parts funds.
Independent Normally Open, Normally Closed Output: The phase
sequence protector adopts high-power double-group contact relays,
which can independently control devices with different voltage
levels, and is more widely used.
3 . Visual display : The phase sequence protector adopts a dedicated wide temperature
and high-definition Chinese liquid crystal display, and displays
the three-phase power supply phase voltage value during normal
operation; in case of failure, it directly displays the cause of
the fault in Chinese, and it can simultaneously display which phase
fault and the fault The voltage value is very intuitive and it is
easy to quickly determine the cause and location of the fault.
4 . Fault Record : The phase sequence protector adopts non-volatile storage
technology. When overvoltage, undervoltage, phase loss, imbalance,
or phase sequence fault occurs, the fault is recorded. Even if this
product is completely powered off, fault information can be
memorized to facilitate troubleshooting.
5 . Installation method : The phase sequence protector base adopts rail type and has two M4
screw holes. It can be installed on HT35 rails or M4 screws. The
two mounting methods are more flexible and convenient.
6 . Humanized Voltage Imbalance Protection : The phase sequence protector internally creates an optimized
mathematical model that automatically adjusts the operating time
based on the three-phase voltage unbalance and does not require
user settings.
Features
Protective Functions
Applications
Model | JVRD |
Input circuit=Measuring circuit | L1,L2,L3 or L1,L2,L3,N |
Rated voltage(line voltage) | 220VAC,380VAC,400VAC 440VAC,460VAC,50/60HZ |
Monitoring functions | phase sequence,phase loss,overvoltage,undervoltage,phase unbalance neutral loss |
Phase unbalance threshold | 15% fixed |
Delay time for overvoltage and undervoltgae | 5-8s fixed(0.1~10s adjustable for JVRD-xxxW) |
Delay yome for phase loss, phase unbalance,phase sequence | 1-2s fixed |
Reset time | 0.5s fixed |
indicators | Phase sequence,phase loss,overvoltage,undervoltage,normal |
Output contacts | 2C/O(1C/O&1C/O&1NC for 3-phase 4 wire) |
Contact capacity | 6A,250VAC(resistiveload) |
Degree of protection | IP20 |
Working conditions | -25℃~65℃,≤85%RH cnon-condensing |
Mechanical durability | 1000000 cycles |
Dielectric strength | >2KVA 1min |
Weight | 130g |
Dimension(HxWxD) | 79x23x79mm |
Mounting | Din Rail |