Add to Cart
Electronic Pumps Three Phase Protection Relay 5 LEDs For Status
Indication
Phase sequence protector is a multi-function three-phase power
system or three-phase power equipment monitoring and protection
equipment.
The phase sequence protector can display the three-phase power
supply voltage in real time, and can output through the relay when
the power supply overvoltage protection, undervoltage protection,
phase loss protection, unbalance protection, fault phase
protection, PTC temperature protection, load side protection and
other faults occur. The form provides the user with an alarm output
and the contact control signal output by the protection circuit
action, which functions as an alarm and protection. Sets
three-phase voltage display, over-voltage protection, under-voltage
protection, phase loss protection (phase-failure protection),
voltage imbalance protection, phase sequence protection (wrong
phase protection) in one, using a powerful microprocessor chip and
non-easy Loss of storage technology, display using high-definition
ultra-wide temperature Chinese liquid crystal, with full-featured,
stable performance, intuitive display, easy operation.
Product main features
1 . High accuracy
2 . Wide voltage range
3 . Independent output contacts
4 . Directly display
5 . Broken record
6 . Easy to mount
7 . Voltage unbalance protection
Features
Protective Function
Applications
Order information
1.Basic Model:JVRD-380NA
2.Rated voltage code:22-220VAC,38-380VAC,44-440BAV,46-460VAC
Model | JVRD |
Input circuit=Measuring circuit | L1,L2,L3 or L1,L2,L3,N |
Rated voltage(line voltage) | 220BAV,380BAV,400VAC,440VAC |
Monitoring functions | Phase sequence,phase loss,overvoltage,undervoltage,phase unbalance |
Phase unbalance threshold | 15%fixed |
Delay time for undervoltage and overvoltage | 5-8s fixed(0.l1-10s adjsutable for JVRD-xxxW) |
Delay time for phase loss,phase unbalance,phase sequence | 1-2s fixed |
Reset time | 0.5s fixed |
Indicators | Phase sequence,phase loss,overvoltage,undervoltage,normal |
Output contacts | 2C/O (1C/O&1NC for 3 -PHASE,4-WIRE) |
Contact capacity | 6A,250VAC(resistive load) |
Degree of protection | IP20 |
Working conditions | -25℃~65℃,≤85%RH,non-condensiing |
Mechanical durability | >2KVAC 1min |
Weight | 130g |
Dimension(HXWXD) | 79X23X79mm) |
Mounting | Din rail |