Lighting 1200 Round Aluminium Sheet Circle Cookwares Non - Stick Pans

Lighting 1200 Round Sheet Aluminium Circle Aluminum Cookwares Non-stick Pans

Parameters:

1.1000 SERIES:

1050 1060 1070 1090 1100 1235representative series aluminum plate is also known as pure aluminum, in the

series in 1000series belongs to all the alumina quantity of a maximum number of series. Purity can achieve

99.00% above.

2.3000 SERIES:

3000 series aluminum represents 3003 3004,3005, 3 A21 primarily. And can be called in the 3xxx series

aluminum antirust aluminum production process more outstanding. The 3000series aluminum plate is by

manganese as the main component. Content at 1.0-1.5 between. Is a rust-proof function better series.

Conventional application in the air conditioning, the refrigerator, such as car in damp environment

3. 5000 SERIES

5000series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the

more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-

5%. And can be called aluminum magnesium alloy. Key features for low density, high tensile strength,

elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other

series.

4.6000 SERIES

6000series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000

series and the advantages of the 5000 series 6061 is a cold treatment aluminum forging products, apply to

fight against corrosion, oxidizing demanding applications.

Product Features of cookware Aluminium circle:

a. Wide range of selection on circles' size including customized shape and size;

b. Excellent deep drawing and spinning quality;

c. RoHS and REACH compliance.

Manufacturing of cookware Aluminium circle:

Decoiler → Accumulator→Tension Leveller →Acid&Alkali Cleaner → Rinse → Conversion Treatment →

Priming coater →Infrared Curing Oven →Main coater → Floatation Curing Oven →Strippable Film Applicator

→ Exit Accumulator →Recoiler

Application of cookware Aluminium circle:

aluminium circle for pot making,

aluminium disk for pot,

aluminium circle,

pot circle,

cooking utensils,

cooker, pan,pot,boiler,

cookware making

road sign and traffic sign, and signal plate

Parameters:

Advantages

1. NC full automatic. The production line neither needs workers to contact any materiel during the production

of from the coil start to roll, until the entire volume of materials all completed blanking, nor needs any

adjustment, fundamentally completely eradicate the production safety hidden danger and product quality

problems of the ordinary punch punching.

2. The production line can use roll material directly to product aluminum wafer and do not need the slitting and

crosscutting processing of roll material, thus reduce production processes, production costs, and the

possibility of damage the surface of roll material, and the produced aluminum wafer can be ensured no oil and

no scratches.

3. The production line make full use of the width of the roll material, using high precision servo motor drive

control system and make the distance of wafer to the edge of material and the spacing of wafer is reduced to

minimum, fundamentally reduce the amount of waste material, so that the utilization rate of raw materials

reached more than 80%.

4. The production speed can reach 40-50 pieces per minute and improve the production efficiency.

5. Due to use the mould design of modular, when convert the production specifications of wafer, the

conversion time can be reduced to less than 15 minutes. The diameter range of the wafer can be produced is

85mm to 750mm.

6. Present uncoiling system, six type leveling machine, high rigid mechanical press, automatic palletizing

system and so on, to ensure the high quality of wafer products.

Luoyang Tailian New Materials Co., Ltd.

More than 60000 square meters ground area with initial investment 0.28 billion RMB (up to 0.8 billion as planned), Luoyang Tailian New Materials Co., Ltd. is established in 2016 and located in Weiliu Road, East Industry Cluster of Yichuan County, Luoyang City, Henan Province, specializing in manufacturing of commercial standard aluminium coil, aluminium sheet and further downstream aluminium foil for electrolytic capacitor (etched foil and formed foil), aluminium foil tape, honeycomb aluminium foil, decoration foil and aluminium PS plate.

Currently our plant consists of two aluminium foil production lines of φ280*φ850*2000mm, a cold-rolling production line (1850mm width), four 60-ton vacuum annealing furnaces, two 60-ton energy saving annealing furnaces, two vertical slitting machines, three horizontal slitting machines (1650mm width), ten etched foil and formed foil production lines, two production lines of coated foil for super electrolytic capacitor, standard laboratory and other supporting facilities.

We are equipped with advanced equipment, complete facilities, experienced managing, researching and developing team. We have got multiple national patents for cathode aluminium foil production. Our products are widely accepted by customers in the market, as good as Japanese and South Korean products.

In present marketing situation we will keep dedicated to product quality and marketing ethics to develop along with our customers and do the best to bring our products and service to a leading level in the industry.