Tube Master 2 Axis CNC Plasma Mild Steel Pipe Cutting Machine with Panasonic Motor

Tube Master 2 Axis CNC Plasma Mild Steel Pipe Cutting Machine with Panasonic Motor​​

Product details:

1) It is used gantry style design, which is parallel to the pipe. The tractor with lifting tool installed on the gantry beam. The pipe fix by chuck jaw, and with movable and adjustable pipe supporters which on the rails and under the pipe.

2) When cutting, CNC control system will control the tractor move and pipe rotate, to cut the pipe. Whole machine work stability and can be long term used. Easy operation and high efficiency.

3) Fit work for 50-500mm diameter without bevel cutting pipes.

Machine Data:

Basic components and specification:

Strong Beam with heat dissipation, with weld and after stress relief processing. That make sure the beam is strong and hard to distortion.

1) X axis rail way length: 7000mm

2) X axis driving system: TORCH LENGTH MOVING ACCORDING TO PIPE DIRECTION (step motor with driver and gear box)

3) Y axis chuck diameter: φ50-500mm

4) Y axis driving system: PIPE ROTATING AXIS (Japan PANASONIC servo 750W digital servo motor with driver and gear box)

5) Z axis driving system: Lifting up and down axis

6) X and Y axis gas and cable moving: Heavy duty industrial cable chain

7) X axis rail: 24KG/m High definition heavy duty railway

8) Control cabinet, electrical cabinet, High frequency cabinet: With components of OMRON, SIEMENS, wire terminal connector SCHNEIDER

Site condition requirement of the machine:

1. Voltage requirement:

1) 3×400v±10%/50Hz,220v±10%/50Hz
2) Three-phase voltage stability less than ±5%

3) Three-phase voltage unbalance less than 2.5%

4) Suggested using voltage-stabilized source.

Note: Grounding resistance ≤10.

2. Compress air pressure requirement (Plasma cutting):

1) Gas flew requirement: 0.9m3/min

2) Gas pressure: 8.3kg/cm2

3) Dew-point temperature not exceed 5 centigrade: oil content≤0.003ppm solid particle≤0.01micron

4) Suggested using oil free air compressor, freezing dryer and ultra filter (system cannot have rust components).

3. Cutting pipe must be smooth surface oval-shaped deviation less than 5mm diameter. Reach ISO standard.

4. Working temperature: -10°C -45°C

Humidity: <90%, no condensation

Surroundings: Ventilation, no big shake

Cutting sample:

Metalwork Machinery (Wuxi) Co., LTd., was established in 2006, specializing in cutting and welding automation manufacture, sales, and services with more than 10 years experience.

Our products ranges: CNC flame and plasma cutting machine, CNC fiber laser cutting machine, arc welding machine, automatic resistance welding machine, automatic seam welding machine, H beam and box beam production line, robotics welding and cutting stations, etc. We also can produce the customized machine according to customer's workpiece.

Moreover, we are specialized in "whole solution" of production lines for our customers, we not only supply you the individual equipment, but also delivery a solution for your project. This will bring you more values from us.

With regard to the welding equipment industry, advanced technical well-know in design and production activities and long term experience, we provide important technology and innovations for tank, pressure vessel, boiler,ship building, nuclear power, electric power station, manufacturing processes. We not only sell the equipment, but also delivery value to customers.

Service is our specialty, after long time cooperation, you will satisfy more with us.

If you have any queries, please do not hesitate to contact us by phone or E-mail. We will revert to your questions, within 24 hours after your requests.

Nearby locations:
PVG Pudong airport, 178Km, by train: 50 min
Wuxi Airport: 35Km, by car: 50 min
Peking Airport: 1100Km to Wuxi, 2hrs by plane
Shanghai Port: 145Km, 2hrs by truck
Wuxi Railway Station: 25Km, 40 min by car