

Add to Cart
vehicle Type | Concrete Mixer Truck | ||
Drive type | 8x4 | ||
Dimension(L×W ×H)(unloaded) | 9960×2520×3965 | ||
Mix round cubage (m3) | 10 | ||
Rotary speed of the drum(r/min) | 0-18 | ||
Input speed(m3 /min) | ≥3 | ||
Output speed(m3 /min) | ≥3 | ||
The rate of remaining | ≤1% | ||
Hydraulic system | Pump/ Motor/Retarder IMPORT PARTS | ||
Approaching angle/Departure angle(°) | 19/16 | ||
Overhang(front/rear) (mm) | 1500/2260 | ||
Wheel base (mm) | 1800+3025+1400 | ||
Max speed(km/h) | 90 | ||
Curb weight(kg) | 13430 | ||
Loading Weight(kg) | 18270 | ||
Engine | Model | MC07H.35-60/WP8.350E61A,water-cooled,four strokes,6 cylinders in
line with water cooling,turbocharged and inter-cooling, directly injection | |
(Steyr technology) | Make | SINOTRUK | |
Fuel type | Diesel | ||
Power, max(kw/rpm) | 257/2200 | ||
Emission | EURO V/IV | ||
Fuel tanker capacity(L) | 300 | ||
Transmission | Model | HW15710L,10 forward&2 reverse10 | |
Brake system | Service brake | Dual circuit compressed air brake | |
Parking brake | spring energy, compressed air operating on rear wheels | ||
(emergency brake) | |||
Auxiliary brake | engine exhaust brake | ||
Steering system | Model | ZF8098 | |
Front axle | cast steel I-shaped front axle VGD71 | ||
Rear axle | MCJ11 double reduction tandem axles with differential locks between
wheels and axles, ratio: 5.29 | ||
Tire | 12.00R20 | ||
Electrics | Battery | 2X12V/165Ah | |
Alternator | 28V-1500kw | ||
Operating voltage | 24V, negative grounded | ||
Starter | 7.5Kw/24V | ||
Cab | TX-M(525MM single bunk),TX-F(749MM single bunk), all-steel forward
control,55ºhydraulically tiltable to the front,2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers |
MAIN SPECIFICATION OF 10 CBM MIXER | ||||
The material of the Agitator is the mix steel | BW300TP | |||
Thickness of the tank body (mm) | End plate cover | 8 | ||
Front Conical parts | 5 | |||
Rear Conical parts | 5 | |||
Cylindrical parts | 5 | |||
Drum Bottom | 5 | |||
over length (mm) | 5250 | |||
Max. Diameter (mm) | 2360 | |||
Mixing Tanker Volume (m3) | 10 | |||
Draght angle(°) | 11 | |||
Rotation speed (rpm) | 1-12 | |||
Feeding speed (m3/min) | ≥3 | |||
Discharging speed (m3/min) | ≥2 | |||
Surplus rate (%) | ≤0.5 | |||
Water tank volume (L) | 450 | |||
reduction gears | TMG 51.2/PMP6.5 | |||
Hydraulic Pump | SUNNY 90 /PMH P90 | |||
Hydraulic Motor | SUNNY 90 /PMH P90 |