

Add to Cart
HD Full Color Indoor Advertising LED Display Screen High Brightness
LED Display
1. LED lamp adopts silicone compression moulding
encapsulation,enhance LED chip reliablity,good consistency of color
temperature,higher cost performance.
2. Black led lamp + black mask,show high contrast ratio and better
visual effict.
3. High S-PWM drive IC,high refresh rate,high gray scale,high
brightness,no ghsting effict.
4. Single point brightness and color calibration,color consistency
is better.
5. Board to board design,no ribbon cable connector type
connection,improve the stability,convenient installation and
disassembly maintence.
6. Brushed aluminum suite,beautiful,vogue and heat dissipation is
more than ten times faster than the plastic suite.
7. Easy maintenance by same screw,one tool
Parameter | Value |
Pixel Configuration | SMD1010 |
Pixel pitch (mm) | 1.667 |
Pixel matrix per panel | 240*180 |
Pixel density (pixel/sqm) | 360000 |
Cabinet Dimensions(L*W) mm | 400*300 |
Module Dimensions(L*W) mm | 200*150 |
Panel material | Die-casting aluminum |
Cabinet weight(kg) | 5 |
Colour grayscale (bit) | 12-16bit |
Gray scale per colour (level) | 4096-65535 |
Refresh rate (hz) | >3840 |
Driving type | 1/32 |
Signal transmission distance (m) | cats cable:<100m single mode fiber:<10km |
Brightness (nit) | 200-1200 can control |
Optimal horizontal viewing angle (degree) | 160 |
Optimal vertical viewing angle (degree | 160 |
Ac input voltage (v) | Ac220 |
Ac input frequency (hz) | 50/60 |
Ac input power maximum value (w/sqm) | 750 |
Ac input power typical value (w/sqm) | 100-300 |
Storage temperature (℃) | -25-70 |
Work temperature (℃) | -10-60 |
IP rating (front/rear) | IP41 |
Storage humidity (rh) | 10%-90% non -condensing |
Working humidity (rh) | 10%-90% non-condersing |
Lifetime Typical value (hrs) | 100000 |