Remote Control portable Handheld Signal Jammer 4 Bands 2500MHz

Brand Name:VBE
Certification:ISO9001
Model Number:VBE-4H
Minimum Order Quantity:1pcs
Delivery Time:3 Working Days After Receiving Payment
Payment Terms:T/T, Western Union, , L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: Floor 4, Building 8, Xinwei Industrial Zone, Nanshan District, Shenzhen, Guangdong Province, China
Supplier`s last login times: within 2 hours
Product Details Company Profile
Product Details

Remote Control Portable Handheld Signal Jammer 4 Bands 2500MHz


Product Introduction:


This is a great signal blocker model that can easily be concealed in the pocket. Just like a phone. which is up to three hours of continuous use on a single charge. There are two possible ways to charge this handheld sized device On the go? There's the car charger. Staying in a hotel room? You can use the outlet. When the green light turns on, 2 -15meters around the device will jam the your select four signals, and it's lightweight enough for those who are always on the move to barely notice the weight in their pockets.


Product Specification:

  1. Jamming Frequency Ranges: 4 working Bands Selectable of GSM, DCS, CDMA, WCDMA, Wifi, GPS, etc.
  2. RF output power: up to 2W
  3. Jamming Radius: 2 to 15 meters depending on the environment signal strength
  4. Antennas: 4pcs small omni antennas
  5. Power Supply : 110-220VAC, Car adapter, or Built-in rechargeable Lithium-Ion (LI-ION) battery
  6. Internal Battery: 2000mAh rechargeable Lithium-Ion (LI-ION)
  7. Battery Working Hours: 2-3 hours
  8. Dimensions: 110*62*30mm
  9. Net Weight: 0.4kgs
BandFrequence RangeAverage Output Power
CH1CDMA/GSM:860-970 MHz30dBm
CH23G:2110-2170 MHz30dBm
CH3DCS/PHS:1805-1930 MHz30dBm
CH4WIFI:2400-2500 MHz30dBm
Size110*62*30mmWeight0.4kg
Output power4WPower SupplyAC110-250V/DC +12V
Woking Temperature-40-50℃Relative Humidity30-80%
Jamming Signal2G/3G/WIFIJamming Range1-10m
Output PortFour PortsChangeable SignalGPS/VHF/UHF

Application

It can be applied at meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
For some locations of special purpose such as hospitals, gas stations and more, please do field test first to make sure no interference happened to the normal operation of their equipment and instrument


Product Image:


Handheld Signale Jammer


FAQ:


Why is there still a signal on the phone's signal indicator when it works?
A: It's just an illusion.In fact, the mobile phone has been unable to communicate.When you press the pull button, you will find that there is no signal on the signal indicator.The cell phone signal shield will not interfere with the normal work of other electronic devices. The antenna should be installed on the corresponding signs of each channel on the host, and then connected to the host power supply.


The effective coverage of the shield is a circular area centered around the shield, so be careful to choose the location of the shield so as to avoid blocking the dead Angle?
A: No.This is because the electromagnetic signal emitted by the cell phone's signal shield is completely within the country's mobile operating band, which only blocks mobile communication.And this signal is always in a relatively static state, and will not affect any electronic equipment.


Is the cellular signal shield the same for GSM mobile phones and CDMA mobile phones?
A: that's a good question.Because CDMA mobile phone's anti-interference performance is far superior to that of GSM mobile phone, the effective shielding distance for CDMA mobile phone is smaller than that of GSM mobile phone, but the difference is not very large, about 2-4 meters.But it also reminds users to pay attention to some particularly important sites, and should increase the number of mobile phone signal blockers when necessary to ensure the shielding effect of CDMA mobile phones.


After working for a period of time, the mobile phone signal mask is hot. Will working long hours damage the machine?
A: thank you for your care. This is a normal phenomenon.In the design, we use the thermal conductivity of aluminum alloy to assist the heat dissipation.This can guarantee long time stable work.As a result, the machine will not damage the machine.


China Remote Control portable Handheld Signal Jammer 4 Bands 2500MHz supplier

Remote Control portable Handheld Signal Jammer 4 Bands 2500MHz

Inquiry Cart 0