

Add to Cart
10 band Signal synchronization system jammer , Signal Blocker ,
Signal Shield , Phone Jammer , Cell phone Signal Jammer
Product Fetures:
Product Applications:
It can be applied at meeting rooms, conference rooms, museums,
galleries, theatres, concert halls, churches, temples, restaurants,
classrooms, training centers, factories, banks, trains, bus and
more Places that require silence, confidentiality and information
security
For some locations of special purpose such as hospitals, gas
stations and more, please do field test first to make sure no
interference happened to the normal operation of their equipment
and instrument
Product Specification:
Band | Frequence Range | Average Output Power | |
CH1 | CDMA:870-880 MHz | 33dBm | |
CH2 | 3G:2010-2025 MHz | 33dBm | |
CH3 | 4G:2557-2635 MHz | 33dBm | |
CH4 | DCS:1805-1835 MHz | 33dBm | |
CH5 | 4G:2300-2390 MHz | 33dBm | |
CH6 | 4G:2110-2135 MHz | 33dBm | |
CH7 | GSM:925-960 MHz | 33dBm | |
CH8 | DCS:1835-1865 MHz | 33dBm | |
CH9 | 3G:2135-2170 MHz | 33dBm | |
CH10 | 4G:1880-1920 MHz | 33dBm | |
Size | 339*236*60mm | Weight | 3.5kg |
Output power | 20W | Power Supply | AC220-DC5V/20A |
Woking Temperature | -40-50℃ | Relative Humidity | 30-80% |
Jamming Signal | 2G/3G/4G/WIFI | Jamming Range | 10-50m |
Output Port | 10 Ports | Changeable Signal | GPS/WIFI/VHF/UHF |
Product Image:
FAQ:
Why is there still a signal on the phone's signal indicator when it
works?
A: It's just an illusion.In fact, the mobile phone has been unable
to communicate.When you press the pull button, you will find that
there is no signal on the signal indicator.The cell phone signal
shield will not interfere with the normal work of other electronic
devices. The antenna should be installed on the corresponding signs
of each channel on the host, and then connected to the host power
supply.
The effective coverage of the shield is a circular area centered
around the shield, so be careful to choose the location of the
shield so as to avoid blocking the dead Angle?
A: No.This is because the electromagnetic signal emitted by the
cell phone's signal shield is completely within the country's
mobile operating band, which only blocks mobile communication.And
this signal is always in a relatively static state, and will not
affect any electronic equipment.
Are cell phone signal Jammer harmful to people and mobile phones?
A: Please rest assured that the electromagnetic signal intensity
emitted by the cell phone signal Jammer is very weak. The test data
indicates that this signal strength is far from harmful to the
human body.At the same time, the mobile phone signal shield is just
blocking the forward signal of the phone, so that the cell phone
cannot be connected with the base station, so there will be no
damage to the phone itself.
Is there any difference between the effective shielding distance of
the mobile phone signal shield in indoor and outdoor use?
A: There are.The effective shielding distance (30-40 meters) of the
cell phone signal shield is generally referred to as indoor
distance.In open areas, the effective distance of shielding can be
several hundred meters.It should be noted, whether they are within
the room, or in outdoor use, effective shielding effect of
shielding distance has relationship with environmental conditions,
such as from the base station near and far, placed, etc.Therefore,
when using cell phone signal shield, this factor should be fully
taken into account to avoid blocking the dead Angle and thus affect
the shielding effect.