Wear Resisting Rubber Lined Single Suction Centrifugal Pump For Fine Particle

Brand Name:SHIZA
Certification:ISO/CE
Model Number:6 / 4 E - R
Minimum Order Quantity:1 Set
Delivery Time:7 Working Days
Payment Terms:T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

6 / 4 R Wear-Resisting Rubber Lined Centrifugal Slurry Pump For Fine Particle


Main introduction of slurry pump


The slurry pump is a single-stage single-suction, cantilever, horizontal centrifugal slurry pump. This type of pump has a thick bearing and is equipped with a heavy-duty bracket, so it is suitable for conveying strong abrasion, high concentration slurry or low concentration high lift slurry. It can be used in multiple stages in series within the range of the pump's large allowable working pressure. The pump can also be used to transport a corrosive slurry.


The slurry pump has a replaceable rubber lining and the impeller is made of rubber. The shaft seal can be a packing seal or a centrifugal seal. The pump's discharge port can be installed at a different angle from 45°C and rotated at eight different angles.


Model meaning


6 / 4 E - R


6------------Suction diameter(Inch)


4------------Discharge diameter(Inch)


E-----------Support type


-------- Pump Model


R-----------Natural Rubber


Specifications


Pump Model6 / 4 E - R
Allowable Max.Power120 kw
Capacity144 - 324 m³/h
Head12 - 45 m
Speed800 - 1350 r/min
Meax.Eff.65 %
NPSH3 - 5 m
Impeller Diameter365 mm

Typical Applications:


Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing


Suction piping system maintenance


1) Check the pump inlet pipeline for leaks and water leakage, and the pump suction piping system is not allowed to leak.
2) Clean the foreign matter in the feed pool to ensure the particle size of the material to be transported, in line with the particle requirements that the pump can pass, so as to avoid the blockage caused by the large particle material and the fiber material entering the pump.
3) Those who use rubber pumps should pay special attention to prevent sharp solids from entering the pump, so as not to cut the rubber parts and affect the service life of the pump.


Construction Design



Shaft Seal Module Design



Performance table


MODELALLOWABLE MATINGMATERIALCLEAN WATER PERFORANCEIMPELLER
MAX.POWERLINERIMPELLERQ CapacityH HeadSpeedMax. Eff.NPSHVANES NO.IMPELLER DIA
(KW)m3/hL/s(m)n(r/min)(%)(m)(mm)
1.5/B-15MM12.6-28.83.5-86-681200-3800402--45152
RURU10.8-25.23--77-521400-3400303
1/1.5B-15MM16.2-34.24.5-9.525-921400-2200202-5.55330
2/1.5B-15MM32.4-729--206-581200-3200453.5-85184
RURU25.2-547--155.5--411000-2600502.5-55178
3/2C-30MM39.6-86.411--2412-641300-2700554--65214
RURU36-75.610--2113-461300-2300602--45213
3/2D-HH60MM68.4-136.819-3825-87850-1400473-7.55457
4/3C-30MM86.4-19824-559-521000-2200714--65245
RURU79.2-18022-505-34.5800-1800593--5
4/3E-HH120MM126-25235-7012-97600-1400502--55508
6/D-60MM162-36040-10012-56800-1550655--85365
RURU144-32440-9012-45800-1350653--55365
6/4S-HH560MM324-72090-20030-118600-1000643--85711
6S-HH560MM468-1008130-28020-94500-1000654--125711
8/6E-300MM360-828100-23010-61500-1140722--95510
RURU324-72090-2007-49400-1000655--105510
10/8E-M120MM666-1440185-40014-60600-1100734--105549
10/8ST-560MM612-1368170-38011-61400-850714--105686
RURU540-1118150-33012-50400-750754--12
12/10ST-560MM936-1980260-5507-68300-8008265762
RURU720-1620200-4507-45300-650802.5-7.5
14/12ST-560MM1260-2772350-77013-63300-600773--085965
RURU1152-2520320-70013-44300-500793--10
16/14TU-1200MM1368-3060380-85011-63250-550794--1051067
20/18TU-1200MM2520-5400700-150013-57200-400855--1051370
China Wear Resisting Rubber Lined Single Suction Centrifugal Pump For Fine Particle supplier

Wear Resisting Rubber Lined Single Suction Centrifugal Pump For Fine Particle

Inquiry Cart 0