High Concentration Abrasive Slurry Pump R Type Bracket For Mining And Metallurgical

High Concentration And Strong Abrasive Slurry Pump For Mining And Metallurgical

Product overview

1. The frame plates for pumps have replaceable wear-resistant metal liners or rubber liners. The

impellers are made of wear-resistant metal or rubber. The frame plate liner and impeller for HH pump

are adoptable of hard metal only.

2. Bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily,

being removed completely when being repaired. Bearing assembly use grease lubrication.

3. The shaft seal could use the packing seal, expeller seal and mechanical seal.

4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any

eight positions to suit installations and applications.

5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices.

6. Wide performance, good NPSH and high efficiency. The pump of this type may be installed in

multistage series to meet the delivery for long distance.

Working Principle

1. Before the pump works, the slurry pump bearing, the staff must first inject the liquid used for conveying into the pipeline and the pump casing, and fill the two;

2. When the slurry pump is started, the liquid in the impeller will be rotated by the blades of the impeller;

3. Under the action of centrifugal force, the liquid rotates forward and then flows out of the impeller;

4. In the process of liquid flowing from the impeller inlet to the impeller outlet, the slurry pump forum, the speed energy and the pressure energy are increased due to the energy conversion, and the liquid flowing out from the impeller is discharged through the pump casing flow passage and then discharged from the discharge pipe;

5. At this time, the impeller inlet is formed by the discharge of water, and the slurry pump, the liquid in the suction surface is pressed into the water inlet of the impeller under the action of atmospheric pressure;

6. The rotating impeller continuously draws in and vents water to form a continuous stream of water.

Intruction

1.This series of slurry pumps is an energy efficient, single stage, single suction, cantilever centrifugal pump for conveying abrasive or corrosive slurries containing solid particles. Widely used in power, mining, metallurgy, coal, building materials, chemicals, food, water conservancy and sewage treatment industries. The large weight concentration of the solid-liquid mixture is 45% for the mortar and 60% for the slurry.

2, this series of pumps has more than 50 basic models, slurry pump design, through the variable speed can get more than 300 kinds of performance for users to choose.

3, the material of the flow component should be based on the physical (particle composition, particle size, shape, hardness, concentration) and chemical (acid, alkali, oil) characteristics of the transport slurry.

4. The transmission mode of the pump has two forms: direct transmission and belt transmission, which are divided into DC, HC, CR, CL, ZV, CV and other modes. (See Appendix 3 for details.) From the direction of the prime mover, the pump rotates clockwise.

Type Notation

Specification

Structure of 8 / 6 R - (R)

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.