

Add to Cart
Main introduction of slurry pump
The 12 / 10 ST - slurry pump is a double pump housing structure, ie the pump body and pump cover are provided with replaceable wear-resistant metal linings (including impellers, jackets, guard plates, etc.). The pump body and pump cover are made of gray cast iron or ductile iron according to the working pressure. They are opened vertically and bolted. The pump body has a stop and is bolted to the bracket. The pump's spout can be rotated and installed at eight angles. The front and rear covers of the impeller are equipped with back blades to reduce leakage and increase pump life.
The 12 / 10ST - is a heavy duty slurry pump, It has a maximum flow of 1980 m³/h. This is a veritable large flow pump. This slurry pump is metal lining with a replaceable liner, easy to replace, easy to repair.If necessary, you can also change to a rubber lining. Of course, the head flow will also drop, but it is more wear and corrosion resistant.
slurry pump pump body pump cover and flow components: This series
of pumps are horizontal, vertical open type, double pump shell
structure slurry pump. The pump body and pump cover are equipped
with a replaceable metal lining. The lining is made of
high-chromium wear-resistant alloy material. The lining can be used
until wear-through, extending the maintenance period and reducing
operating costs. The pump outlet direction can be rotated and
installed at 8 angles.
Bearing assembly: The bearing assembly of the pump adopts a
cylindrical structure, which is convenient for adjusting the
clearance between the impeller and the front guard plate, and can
be completely removed during maintenance. The bearings are greased.
Shaft seal (seal): The shaft seal type of the pump has packing
seal, impeller seal and mechanical seal. Transmission mode: V-type
V-belt drive, flexible coupling drive, gear reducer drive, fluid
coupling drive, variable frequency drive, thyristor speed control,
etc. Among them, the V-shaped V-belt drive has CL, CV, CR, ZL, ZV,
ZR transmission. Overall performance: The pump has a wide
performance range, good cavitation performance and high efficiency.
Multi-stage series technology can be used to meet long-distance
transportation. Overcurrent components are available in a variety
of metals and add depth. With a variety of speeds and a variety of
variants, the pump operates under optimal industrial and mining
conditions. Long service life and high operating efficiency can
meet a variety of harsh conveying conditions.
Model meaning
12 / 10 ST -
12------------Suction diameter(Inch)
10------------Discharge diameter(Inch)
ST------------Support type
---------- Pump Model
Specifications
Pump Model | 12 / 10 ST - |
Allowable Max.Power | 560 kw |
Capacity | 936 - 1980 m³/h |
Head | 7 - 68 m |
Speed | 300 - 800 r/min |
Meax.Eff. | 82% |
NPSH | 6 m |
Impeller Diameter | 762 mm |
Features
1). Cantilever, horizontal Slurry discharging pump
2). Excellent hydraulic performance, high efficiency, and low wear rate
3). Better wear-resistance and corrosive resistance
4). Frame plate for type pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber
5). In allowable pressure range, it can be used in series in stages, and allowable maximum working pressure is 3.6Mpa.
6). Centrifugal seal, mechanical seal and packing seal are available .
7). The discharge branch can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Slurry pump impeller function:
1. The impeller is the part of the slurry pump overcurrent
component that works on the slurry.
2. The impeller is rotated by the pump shaft in the pump body to
obtain energy for the slurry.
3. The mechanical energy is transmitted to the slurry by the
rotation of the impeller, so that the slurry obtains dynamic
pressure energy: it consists of four parts: the front wheel plate,
the rear wheel plate, the blade and the wheel hub.
Slurry pump volute function:
1. Mainly designed and manufactured according to the flow
trajectory of the slurry leaving the impeller, accepting the liquid
removed from the impeller
2. The volute shape is beneficial to transform the kinetic energy
into static pressure to convert the kinetic energy of the liquid
into pressure when the slurry flows outward.
3, the volute should have sufficient strength and good process
characteristics, the outlet part of the slurry pump gradually
increases, becoming a place for energy conversion
Slurry pump throatbush and frame plate liner insert function:
1. Designed for easy assembly and disassembly
2, mainly with the volute to form a slurry flow closed space
3. In most cases, the front guard plate has a water inlet, and the
rear guard plate has a shaft hole.
4. Generally, the larger slurry pump has a front guard plate and a
rear guard plate, and the small pump has only one guard plate.
Construction Design
Shaft Seal Module Design
Performance table
MODEL | ALLOWABLE MATING | MATERIAL | CLEAN WATER PERFORANCE | IMPELLER | |||||||
MAX.POWER | LINER | IMPELLER | Q Capacity | H Head | Speed | Max. Eff. | NPSH | VANES NO. | IMPELLER DIA | ||
(KW) | m3/h | L/s | (m) | n(r/min) | (%) | (m) | (mm) | ||||
1.5/B- | 15 | M | M | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2--4 | 5 | 152 |
RU | RU | 10.8-25.2 | 3--7 | 7-52 | 1400-3400 | 30 | 3 | ||||
1/1.5B- | 15 | M | M | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 |
2/1.5B- | 15 | M | M | 32.4-72 | 9--20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 |
RU | RU | 25.2-54 | 7--15 | 5.5--41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | ||
3/2C- | 30 | M | M | 39.6-86.4 | 11--24 | 12-64 | 1300-2700 | 55 | 4--6 | 5 | 214 |
RU | RU | 36-75.6 | 10--21 | 13-46 | 1300-2300 | 60 | 2--4 | 5 | 213 | ||
3/2D-HH | 60 | M | M | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 |
4/3C- | 30 | M | M | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4--6 | 5 | 245 |
RU | RU | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3--5 | ||||
4/3E-HH | 120 | M | M | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2--5 | 5 | 508 |
6/D- | 60 | M | M | 162-360 | 40-100 | 12-56 | 800-1550 | 65 | 5--8 | 5 | 365 |
RU | RU | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3--5 | 5 | 365 | ||
6/4S-HH | 560 | M | M | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3--8 | 5 | 711 |
6S-HH | 560 | M | M | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4--12 | 5 | 711 |
8/6E- | 300 | M | M | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2--9 | 5 | 510 |
RU | RU | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5--10 | 5 | 510 | ||
10/8E-M | 120 | M | M | 666-1440 | 185-400 | 14-60 | 600-1100 | 73 | 4--10 | 5 | 549 |
10/8ST- | 560 | M | M | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4--10 | 5 | 686 |
RU | RU | 540-1118 | 150-330 | 12-50 | 400-750 | 75 | 4--12 | ||||
12/10ST- | 560 | M | M | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 5 | 762 |
RU | RU | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | ||||
14/12ST- | 560 | M | M | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3--08 | 5 | 965 |
RU | RU | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3--10 | ||||
16/14TU- | 1200 | M | M | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4--10 | 5 | 1067 |
20/18TU- | 1200 | M | M | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5--10 | 5 | 1370 |