Open Impeller Type Slurry Pump , Single Suction Centrifugal Pump For Tailings

Open Impeller Type Slurry Pump , Single Suction Centrifugal Pump For Tailings

Main introduction

The 3 / 2 C - slurry pump is the most popular pump model among rubber lined pump models.Pump 3 / 2 C - is mostly used for the building industry handling ashes of building blocks.

The temperature of the solid-liquid mixture to be transported generally does not exceed 80 ° C (double-shell pump lined with glue pump does not exceed 60 ° C).The head of the rubber-lined impeller should not exceed 63m. The allowable line speed should not exceed 30m/m. Bearings are generally selected from rolling bearings and are lubricated with thin oil or grease. The operating temperature should not exceed 75 °C. The pump's transmission can be equipped with a flexible coupling, a drive belt or a fluid coupling. Couplings, V-belts and pulleys should have safety shields. For double-shell pumps with rubber inner casing, the size of solid particles in the slurry should not exceed 3 mm, and there is no sharp edge; for double-shell pumps with single-shell pump and metal inner casing, the size of solid particles in the slurry should not exceed 80% of the flow section size. The packing seal water pressure should be 35 kPa higher than the pump discharge port pressure.

Advantages

The 3/2C-R slurry pump is a single-stage single-suction, cantilever, horizontal centrifugal slurry pump. This type of pump has a thick bearing and is equipped with a heavy-duty bracket, so it is suitable for conveying strong abrasion, high concentration slurry or low concentration high lift slurry. It can be used in multiple stages in series within the maximum allowable operating pressure range of the pump. The pump can also be used to transport a corrosive slurry

Model meaning

3 / 2 C-R

3-------Suction diameter(Inch)

2-------Discharge diameter(Inch)

C-------Frame type

------Slurry pump type

R--------Natural Rubber

Typical Applications:

-Ash Handling

-Cyclone Feeds

-Pulp and Paper

-Abrasive Slurries

-Coal Preparation

-Mineral Processing

-Aggregate Processing

-Heavy Refusal Removal

Construction Design

Performance table

Shaft Seal Module Design

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.